Abstract:CO2 capture using amine-based solvent is now available for large scale deployment. Water balance and amine emission are drawing more and more attention as they have significant impacts on operation stability, economic cost and environmental pollution. However, experimentally investigating a new amine solvent in a demonstration test platform is time-consuming and costly. In this paper, a shortcut method was developed based on volatility data of a solvent to evaluate water balance and amine emission in CO2 capture system. Water balance can be achieved by employing a simple water wash after absorber and regulating water wash temperature according to flue gas temperature, CO2 concentration, and CO2 removal efficiency. Simple water wash reduces monoethanolamine (MEA) emission from absorber (215–425 mg/m3) to a level below 5 mg/m3. With constant water wash temperature, increasing absorber temperature condenses more water which is beneficial for reducing amine emission. Variable amines and configurations are also evaluated. Simple water wash is not efficient for those volatile solvents such as 40% 2-amino-2-methyl-1-propanol (AMP), piperazine (PZ)/1-(2-Hydroxyethyl)piperidine (HEPD), MEA/N-methylpyrrolidone (NMP) water-lean solvent, and 2-(diethylamino)ethanol (DEEA)/2-((2-aminoethyl) amino) ethanol (AEEA) biphasic solvent as their amine emissions after simple water wash are still higher than 100 mg/m3. For those solvents with moderate volatility, such as 30%MEA and 30–40%AMP, a second water wash is effective to reduce amine emission below 1 mg/m3. While for those highly volatile solvents, such as PZ/HEPD and DEEA blended biphasic solvents, acid wash for further amine emission reduction may be more competitive in view of capital cost and operation cost.

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Resolving the Contradiction Caused by Water-Lean Solvent Through a Split-Flow Heat Exchange Strategy Toward Efficient Carbon Dioxide Capture

Efficient CO<sub>2</sub> capture by a novel deep eutectic solvent through facile, one-pot synthesis with low energy consumption and feasible regeneration

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

Simulation and Optimization for Flue Gas CO2 Capture by Energy Efficient Water-Lean Ionic Liquid Solvent

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Simulation and Analysis of Carbon Dioxide Capture Process with Split Flow Modification Using MDEA/PZ Blend Solution in a Coal-fired Power Plant

Superior energy-saving splitter in monoethanolamine-based biphasic solvents for CO2 capture from coal-fired flue gas

Optimization of solvent properties for post-combustion CO2 capture using process simulation

Process Simulation and Energy Consumption for CO<SUB Align="right">2 Capture with Different Flowsheets

Simulation of a CO_2 Capture System Using Amine Solutions for Selection of Absorbents

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Evaluation on water balance and amine emission in CO2 capture

Process Simulations of CO2 Desorption in the Interaction between the Novel Direct Steam Stripping Process and Solvents

New Approach with Universal Applicability of Evaluating the Heat Requirements in Solvent Regeneration Process for Post-Combustion CO2 Capture

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Integration of membrane contactors and catalytic solvent regeneration for efficient carbon dioxide capture