Abstract:Post-combustion carbon capture appears to be a promising solution to reduce the emission of carbon dioxide (CO 2 ) from power plants that generate electricity using either coal or natural gas. In addition, carbon capture process efficiency, capacity, and energy consumption have become challenging against the performance of the capture process. However, synergistic effect due to solvents blend has gained attention to reduce the process energy consumption and enhance process efficiency. In this study, blends of methyldiethanolamine (MDEA) and piperazine (PZ) at different concentrations were investigated using a validated post-combustion capture process model using Aspen HYSYS. Results were compared with 30 wt% monoethanolamine (MEA) as reference case. The effective process variables are concentration of solvents, the amount of water and solvent in the makeup section, viscosity of solvent, energy consumed in different process stages, and the amount of lean solvent flow rate. These variables were studied against fixed process variables using rate-based model. The study shows that using (43 wt% MDEA/7 wt% PZ) for post-combustion carbon capture needs 2.53 MJ/kg CO2 regeneration energy for 88.5% process efficiency compared to 4.003 MJ/kgco 2 for 30 wt% MEA without the need for any process modifications. In addition, it was found that solvents synergistic effect contributes to resolving the drawbacks of post-combustion capture that will enable the high utilization of the process and contribution to reduce the consequences effect of climate change. Therefore, the study will help policymakers, industries and encourage researchers towards the large-scale commissioning of blended solvent -based post-combustion capture process.

Process Simulation and Energy Consumption for CO<SUB Align="right">2 Capture with Different Flowsheets

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach

A Comparative Study of MEA and DEA for Post-Combustion CO 2 Capture with Different Process Configurations

Process Simulations of CO2 Desorption in the Interaction between the Novel Direct Steam Stripping Process and Solvents

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

Process simulation for CO; absorption with mixed amine solution

Simulation and Analysis of Carbon Dioxide Capture Process with Split Flow Modification Using MDEA/PZ Blend Solution in a Coal-fired Power Plant

Optimization of solvent properties for post-combustion CO2 capture using process simulation

Experimental And Rate-Based Modeling Study Of Co2 Capture By Aqueous Monoethanolamine

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Systematic study of aqueous monoethanolamine‐based CO2 capture process: model development and process improvement

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Post-combustion carbon capture process modeling, simulation, and assessment of synergistic effect of solvents

Absorption solubility calculation and process simulation for CO; capture

Sensitivity Analysis of Post Combustion Carbon Capture Using Monoethanolamine (MEA) as a Solvent. A Simulation Study

Absorption Solubility Calculation and Process Simulation for CO2 Capture

MEA-based CO2 capture: a study focuses on MEA concentrations and process parameters

Process Simulation for CO2 Absorption with Mixed Amine Solution

New Approach with Universal Applicability of Evaluating the Heat Requirements in Solvent Regeneration Process for Post-Combustion CO2 Capture

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Simulation of a CO_2 Capture System Using Amine Solutions for Selection of Absorbents

Process Simulation and Energy Consumption for CO&lt;SUB Align="right"&gt;2 Capture with Different Flowsheets