Abstract:Amine-based chemisorption technology with water-lean solvent is a promising route towards low-cost CO2 capture. However, the low heat capacity of water-lean solvent makes efficient heat exchange through the traditional technology challenging, causing difficulty solvent regeneration. This paper proposes split-flow heat exchange strategy for CO2-rich solvent to reduce external steam consumption and increase the regeneration temperature. Optimized water-lean amine-based solvent, composed of blend amines and physical solvent, was employed and its CO2 capture performance analyzed for a bench-scale continuous system. A rigorously validated process simulation method is proposed for operational optimization and comprehensive economic, exergy, environment, energy analysis of the capture process on an industrial scale. The experimental and simulation results indicated that the optimal ratio of split-flow was 0.55-0.7, with this ratio resulting in the reflux temperature increasing from 90 to 110 Â°C. The proportion of total energy duty that went to reaction heat was increased to 80% from 61% in the benchmark case; this increase was ascribed to the synergistic promotion of physical solvent and split-flow heat exchange strategy. The water-lean solvent could operate at a regeneration duty of 2.07 GJ/t CO2 with a total capture cost of US $50.40/t CO2 (27% lower than the benchmark value) from coal-fired flue gas. In summary, the net CO2 reduction can be increased by 32%, taking the utility heat-cold consumption into account. This research indicates a feasible method of taking full advantage of water-lean solvent to achieve efficient CO2 capture.

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Simulation and Optimization Study on Aqueous MEA-Based CO2 Capture Process

Process modeling of an advanced NH₃ abatement and recycling technology in the ammonia-based CO₂ capture process

Analysis on Temperature Vacuum Swing Adsorption Integrated with Heat Pump for Efficient Carbon Capture

Study on Regenerative Process of the New Carbon Capture Technique Based on Antisolvent Crystallization to Strengthen Crystallization

Modeling Analysis of Energy Requirement in Aqueous Ammonia Based CO2 Capture Process

Resolving the Contradiction Caused by Water-Lean Solvent Through a Split-Flow Heat Exchange Strategy Toward Efficient Carbon Dioxide Capture

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

4E Evaluation and Multi-Objective Optimization of Low Concentration Flue Gas CO2 Capture and Multi-Product Conversion Process

Multistage Circulation Absorption Improvement: Simulation and Energy-Saving Evaluation of an Innovative Amine-Based CO2 Capture Process

Carbon capture by ammonia with reinforced crystallization

Regenerative process analysis of the new carbon capture technique based on mixed absorbent

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

A 4E Analysis of a Novel Coupling Process of Syngas Purification and CO2 Capture, Transcritical CO2 Power and Absorption Refrigeration