Studies on absorption and regeneration for CO 2 capture by aqueous ammonia
Haisheng Chen,Binlin Dou,Yongchen Song,Yujie Xu,XueJu Wang,Yi Zhang,Xu Du,Chao Wang,Xuehui Zhang,Chunqin Tan
DOI: https://doi.org/10.1016/j.ijggc.2011.11.017
IF: 4.4
2012-01-01
International Journal of Greenhouse Gas Control
Abstract:To examine the characteristics of absorption and regeneration for CO 2 capture by aqueous ammonia, the removal efficiency of CO 2, the pH value of solution and thermal decomposition of solid product were investigated using a continuous absorption system and TGA technique. The reaction product was analyzed by XRD method. It is observed that the initial removal efficiency of CO 2 can reach 90% by 10wt% concentration of aqueous ammonia. Higher concentration of aqueous ammonia from 5 to 20wt% enables higher CO 2 removal efficiency. The physical solubility of CO 2 in aqueous ammonia solvent decreases, however, with increasing absorption temperature from 20 to 50°C CO 2 removal efficiency increased slightly due to increase the reaction rate of the dissolved CO 2 with the solvent. NH 4HCO 3 is the main product of the CO 2-NH 3-H 2O reaction. The regeneration results showed there was one distinct phase in the thermal decomposition of reaction product and the mass loss value during this phase was more than 95%. An improved iterative Coats-Redfern method was used to evaluate non-isothermal kinetic parameters. The reaction order model (first order) predicted accurately the main phase in the thermal decomposition of the reaction product. The values of kinetic parameters such as E and A were different for four heating rates of 5, 10, 15, and 25Kmin -1, indicating the thermal decomposition of reaction product may depend on the conditions, especially the heating rate in dynamic experiments. Based on the experimental results, system design of CO 2 capture by aqueous ammonia was also discussed. © 2011 Elsevier Ltd.