Abstract:Using a new kind of absorbent which is the mixture of aqueous ammonia and ethanol, a process of carbon capture by ammonia of low concentration with reinforced crystallization and lower energy consumption is presented. By the application of antisolvent crystallization to reinforce crystallization process, low energy consumption of regeneration could be achieved easily due to saving the energy to heat the water of carbonized ammonia in the desorption process. TGA is adopted to study the regeneration process of crystal product, and heating method pyrolysis and constant temperature pyrolysis are used respectively. What' s more, if the waste heat from the power plant can be used as heat source of the regeneration process, the more energy can be saved for the technology. With the regeneration temperature between 40 ℃and 80 ℃, the active energy can be as low as 48.38 kJ/mol. The regeneration process is studied at the constant temperature of 60℃, 80℃ and 100℃. And if the rate of rising temperature is 5 K/min, the crystal product will be totally decomposed when the temperature reaches 80℃,not only can achieve low energy consumption but also have fast regeneration rate which have the advantage over the process of rich carbonated ammonia. For the mixed absorbent, the different proportion of the dissolved agent has little effect on the regeneration process, and the composition of the mixture is determined only by the absorption rate. The better regeneration rate can be obtained by the constant temperature of 80 ℃. After the calculation of 16 classical models, the model function was selected for the study of crystal products.

Reaction Sensitivity Analysis of Regeneration Process of CO2 Capture Using Aqueous Ammonia

A Comprehensive Model for Regeneration Process of CO 2 Capture Using Aqueous Ammonia Solution

Reaction Sensitivity Analysis of CO2 Absorption Using Aqueous Ammonia in a Packed Column

Analysis on Regeneration Energy of NH3-based CO2 Capture with Equilibrium-based Simulation Method

On Reaction Models of Regeneration Process for NH 3 -Based CO 2 Capture

On Reaction Models of Regeneration Process for NH3-Based CO2 Capture

Regenerative process analysis of the new carbon capture technique based on mixed absorbent

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Modeling Analysis of Energy Requirement in Aqueous Ammonia Based CO2 Capture Process

Rate-Based Modeling Of Regeneration Process For Co2 Capture By Aqueous Ammonia Solution In A Pilot Plant At Munmorah Power Station

Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution

Heat requirement for regeneration of a CO_2 capture system using amine solutions

Experimental Study on Regeneration Characteristic of CO2-rich Ammonia Solution and Absorption Characteristics of the Regenerative Solution

Experimental And Rate-Based Modeling Study Of Co2 Capture By Aqueous Monoethanolamine

Determining the Performance of an Efficient Nonaqueous CO2 Capture Process at Desorption Temperatures below 373 K

New Approach with Universal Applicability of Evaluating the Heat Requirements in Solvent Regeneration Process for Post-Combustion CO2 Capture

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

Sensitivity Analysis of Post Combustion Carbon Capture Using Monoethanolamine (MEA) as a Solvent. A Simulation Study

Study on Regenerative Process of the New Carbon Capture Technique Based on Antisolvent Crystallization to Strengthen Crystallization

A Novel Process for NH3-based CO2 Capture by Integrating Flow-by Capacitive Ion Separation

Rate-based modelling of CO2 regeneration in ammonia based CO2 capture process