Abstract:Based on thermodynamic calculation and experimental research, the reaction characteristics of reactive sorption enhanced steam reforming of modeled biogas for hydrogen production (ReSER-Biogas)have been studied in this paper.First,the hydrogen production model was established where the methane steam reforming reaction was coupled with the calcium oxide and carbon dioxide reaction. The influence of some reaction conditions such as CO2removal ratio(ζ), reaction temperature (T),the molar ratio of steam to methane (β)on the methane conversion and hydrogen purity was investigated according to the simulation results with volume ratio of carbon dioxide to methane in feed (α) 0.25,0.47 and 0.63,respectively.The calculation results showed that both the methane conversion and H2purity could be increased effectively by the raise of ζ,T and β. When ζ=0.95,T=600℃,β=4,the methane conversion could reach 94% and H2concentration could reach 96%.Experimental evaluation of ReSER-Biogas was studied by using the mixture of Ni catalyst and nano-CaO based CO2adsorbent in a fixed bed reactor with modeled biogas.Based on the variation of T,β and α,the methane conversion and H2concentration under different reaction conditions were obtained.The reliability of the simulation results and the laws of the reaction conditions influence were verified to be true.The experimental results indicated that the hydrogen content reached up to 93% with CO of 0.32% under the conditions of P=0.1 MPa,ζ=0.95,T=600℃,β=4 and α=0.43 which proved that the ReSER-Biogas could produce high-purity hydrogen with little CO in one reactor at lower temperature comparing with the conventional non adsorption enhanced biogas-steam reforming process.It is of great practical significance for the development of high-efficienty and energy-saving technologies for hydrogen production by biogas.

On Reaction Models of Regeneration Process for NH3-Based CO2 Capture

On Reaction Models of Regeneration Process for NH 3 -Based CO 2 Capture

A Comprehensive Model for Regeneration Process of CO 2 Capture Using Aqueous Ammonia Solution

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Modelling and simulation of carbonation process of ammoniacal brine: I kinetic model of carbonation reactions

The calculation and experimental study of reactive sorption enhanced steam reforming of modeled biogas for hydrogen production

Analysis on Regeneration Energy of NH3-based CO2 Capture with Equilibrium-based Simulation Method

Reaction Sensitivity Analysis of Regeneration Process of CO2 Capture Using Aqueous Ammonia

Rate-based modelling of CO2 regeneration in ammonia based CO2 capture process

Kinetic Modeling with Automatic Reaction Network Generator, an Application to Naphtha Steam Cracking

Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution

Rate-Based Modeling Of Regeneration Process For Co2 Capture By Aqueous Ammonia Solution In A Pilot Plant At Munmorah Power Station

Modeling Analysis of Energy Requirement in Aqueous Ammonia Based CO2 Capture Process

Heat and mass transfer model for desiccant solution regeneration process in liquid desiccant dehumidification system

Heat requirement for regeneration of a CO_2 capture system using amine solutions

Modelling analysis of solid precipitation in an ammonia-based CO 2 capture process

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Comparison of Thermodynamic Models for Carbon Capture with Aqueous Ammonia

Performance Simulations of Mea/Nh3 Based Large-Scale Co2 Capture in Packed Columns under Different Flue Gas Parameters

Rate-based modelling of combined SO 2 removal and NH 3 recycling integrated with an aqueous NH 3 -based CO 2 capture process

Modeling of Multiple Cycles for Sorption-Enhanced Steam Methane Reforming and Sorbent Regeneration in Fixed Bed Reactor