Abstract:Solvent-based CO 2 capture is a commonly employed post-combustion technique in processes involving absorber-stripper columns. This study focused on computer simulations with equilibrium- and rate-based modeling of CO 2 capture using the amine solvents 2-amino-2-methyl-1-propanol (AMP), diethanolamine (DEA), and methyl diethanolamine (MDEA) and thermodynamic methods involving electrolyte NRTL models. The objective of this study was to understand the impacts of rate-based modeling, the type of amine, and thermodynamic methods on carbon capture. Within this study, the amine-based CO 2 capture process from coal-power plant flue gas was studied using Aspen Plus modeling. Simulations were also conducted to determine the impact of thermodynamics and kinetics on the CO 2 capture performance of the system. The results were analyzed on the basis of captured CO 2 according to the solvents and models. The equilibrium approach was mostly invalid because of the oversimplified ideal stage assumptions through the column. The lowest carbon capture capacity was obtained with MDEA, while DEA yielded the best results. A sensitivity analysis with rate-based modeling showed the significant impact of the inlet CO 2 composition. The amine-based CO 2 capture process simulation included solution chemistry, electrolyte thermodynamics, rigorous transport property modeling, reaction kinetics, and rate-based multistage simulation, which could be applicable to different solvent systems.

Comparison of Thermodynamic Models for Carbon Capture with Aqueous Ammonia

Prediction Model of Absorption Heat for CO2 Capture Using Aqueous Ammonia

Modeling Analysis of Energy Requirement in Aqueous Ammonia Based CO2 Capture Process

Experimental Study on Carbon Dioxide Absorption by Aqueous Ammonia with Nickel and Chromium Ions in Bubbling Tower at Low Temperatures

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution

Process modeling of an advanced NH₃ abatement and recycling technology in the ammonia-based CO₂ capture process

A Comprehensive Model for Regeneration Process of CO 2 Capture Using Aqueous Ammonia Solution

Rate-Based Modeling of CO2 Absorption in Aqueous NH3 in a Packed Column

Rate-based modelling of CO2 regeneration in ammonia based CO2 capture process

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Impact of thermodynamics and kinetics on the carbon capture performance of the amine-based CO2 capture system

Process simulations of NH3 abatement system for large-scale CO2 capture using aqueous ammonia solution

CO 2 capture using piperazine-promoted, aqueous ammonia solution: Rate-based modelling and process simulation

Assessment of carbon dioxide separation by amine solutions using electrolyte non-random two-liquid and Peng-Robinson models: Carbon dioxide absorption efficiency

Rate-Based Modelling and Simulation of Large-Scale CO2 Capture Using a Piperazine-Promoted Aqueous Ammonia Solution

Experimental Studies and Rate-Based Simulations of CO2 Absorption with Aqueous Ammonia and Piperazine Blended Solutions

Study of the Heat of Absorption of CO2 in Aqueous Ammonia: Comparison Between Experimental Data and Model Predictions

Rate-Based Modeling Of Regeneration Process For Co2 Capture By Aqueous Ammonia Solution In A Pilot Plant At Munmorah Power Station