Abstract:Aqueous ammonia can be used to capture CO2 from flue gas of coal-fired power plant with quick reaction rate, high removal efficiency, and high loading capacity of CO2. It is thought to be a promising technology. However, the CO2 absorption rate, diffusion rate and VLE (Vapor liquid equilibrium) in aqueous ammonia have still been rarely researched. More research is necessary for these characters of ammonia solution as CO2 absorbent. The paper will focus on the fundamental characteristics of CO2 in aqueous ammonia. A series of tests were conducted in a semi-batch reactor that has been developed in this paper. CO2 removal efficiencies at different concentrations of aqueous ammonia have been studied in the similar operation conditions to compare their basic characters in the CO2 absorption process. And a small wetted wall column (WWC) with a contact area of about 41.45 cm(2) was also built for the study of the absorption rate, diffusion, and solubility of carbon dioxide in the aqueous solution. In the paper, reaction rate and overall gas transfer coefficient were studied. The concentration of ammonia ranges from 1, 5, 10 to 15. CO2 and N-2 are used to simulate the flue gas. The concentration of CO2 ranges from 5, 10, 15, to 20%. The reaction temperatures are 20 degrees C and 40 degrees C. It is indicated in this paper that the best concentration of aqueous ammonia should be selected from 5% to 10%. And aqueous ammonia has a high Flux in WWC, which is three times higher than that of MDEA+PZ, under the same condition. It is also found that K-G is appropriate to be used in the mass transfer process of the carbon dioxide absorption by aqueous ammonia. Alls of these experiments established foundation for the further study of CO2 removal by ammonia. (c) 2008 Elsevier Ltd. All rights reserved

Prediction Model of Absorption Heat for CO2 Capture Using Aqueous Ammonia

Study of the Heat of Absorption of CO2 in Aqueous Ammonia: Comparison Between Experimental Data and Model Predictions

Comparison of Thermodynamic Models for Carbon Capture with Aqueous Ammonia

Experimental Study on Carbon Dioxide Absorption by Aqueous Ammonia with Nickel and Chromium Ions in Bubbling Tower at Low Temperatures

Modeling Analysis of Energy Requirement in Aqueous Ammonia Based CO2 Capture Process

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Rate-Based Modeling of CO2 Absorption in Aqueous NH3 in a Packed Column

Research on Heat Requirement of Aqua Ammonia Regeneration for CO2 Capture

A Comprehensive Model for Regeneration Process of CO 2 Capture Using Aqueous Ammonia Solution

Process simulations of NH3 abatement system for large-scale CO2 capture using aqueous ammonia solution

Heat of Absorption of Co2 in Aqueous Ammonia and Ammonium Carbonate/Carbamate Solutions

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Kinetics region and model for mass transfer in carbon dioxide absorption into aqueous solution of 2-amino-2-methyl-1-propanol

Reaction Sensitivity Analysis of CO2 Absorption Using Aqueous Ammonia in a Packed Column

Absorption of carbon dioxide in aqueous ammonia

Experimental Study on Co2 Absorption by Aqueous Ammonia Solution at Elevated Pressure to Enhance Co2 Absorption and Suppress Ammonia Vaporization

Vapor–liquid equilibrium of CO 2 in NH 3 –CO 2 –SO 2 –H 2 O system

Kinetics of CO2 Absorption in Aqueous Ammonia Solution

Volumetric Overall Mass Transfer Coefficients of CO_2 Absorption Into Aqueous Ammonia of Fine Spray

Assessment of carbon dioxide separation by amine solutions using electrolyte non-random two-liquid and Peng-Robinson models: Carbon dioxide absorption efficiency

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia