Abstract:High efficiency, large capacity, and low energy consumption have become an important challenge in performances of post-combustion carbon dioxide (CO2) capture and regeneration. Blended absorbents have shown great potential but their process simulation, modeling, and optimization have not been known definitively. This work developed the blended aqueous absorbents based on piperazine (PZ) activators: PZ-activated methyldiethanolamine (MDEA), potassium carbonate solution (K2CO3), and aqueous ammonia (NH3H2O) to improve their techno-economic performances. The whole process simulation was conducted using a validated rate-based model under given a CO2 capture efficiency of 85%. In this process, the key factors including the molar concentration of the absorbent, PZ molar ratio, CO2 load of lean liquid, lean-liquid temperature, flue-gas temperature, and rich-liquid temperature, were employed for the design of experiment using response surface methodology. A series of nonlinear regression equations were developed using the flow rate of absorbents, the reboiler heat duty (in the units of gigajoules per ton of CO2), and the cooling-water flow rate as the multi-objective function. Subsequently, the optimal Pareto solution set and compromise solutions were determined using the multi-objective genetic algorithm and finally, their performances were assessed using the fuzzy close-degree algorithm. It was found that the optimal operating parameters can be determined effectively according to the proposed approach. For each PZ-activated blended absorbents, the trade-off effect exists between absorbent flow rate, reboiler heat duty, and cooling water consumption. The absorbents having optimal techno-economic performance were recommended to be PZ-activated MDEA, followed by PZ-activated K2CO3 and PZ-activated NH3H2O when considering the regeneration energy consumption. The results may provide a positive reference for process design and optimization of the industrial post-combustion CO2 capture system.

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Process simulations of NH3 abatement system for large-scale CO2 capture using aqueous ammonia solution

Process simulations of large-scale CO2 capture in coal-fired power plants using aqueous ammonia solution

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Process modeling of an advanced NH₃ abatement and recycling technology in the ammonia-based CO₂ capture process

Rate based modeling of absorption and regeneration for CO2 capture by aqueous ammonia solution

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Optimization of Post Combustion CO2 Capture from a Combined-Cycle Gas Turbine Power Plant via Taguchi Design of Experiment

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Modeling Analysis of Energy Requirement in Aqueous Ammonia Based CO2 Capture Process

A novel process for capturing carbon dioxide using aqueous ammonia

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia

Performance Simulations of Mea/Nh3 Based Large-Scale Co2 Capture in Packed Columns under Different Flue Gas Parameters

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Intrinsic Insight of Energy-Efficiency Optimization for CO2 Capture by Amine-Based Solvent: Effect of Mass Transfer and Solvent Regeneration

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Process simulation, optimization and assessment of post-combustion carbon dioxide capture with piperazine-activated blended absorbents

Impact of thermodynamics and kinetics on the carbon capture performance of the amine-based CO2 capture system

Energy-efficient Process Intensification for Post-Combustion CO2 Capture: A Modeling Approach