Abstract:Combined CO2 and SO2 absorption performance in a new combined capture process was evaluated in this work by experimental study using a lab-scale packed column system and a developed rate-based model in Aspen Plus. The combined absorption experiments were carried out to identify the impact of several key operating parameters, including flue gas SO2 and CO2 concentrations, CO2 and SO2 loadings, the absorption temperature, and the L/G ratio, on CO2 absorption and NH3 volatilization. Experimental results indicated that 85% CO2 absorption efficiency was achieved in 5 wt% aqueous NH3 solvent containing lean CO2 loading at 0.2 mol CO2/mol NH3 (C/N) and SO2 loading at 0.1 mol SOilmol NH3 (S/N). The rate-based model was developed using the electrolyte-NRTL method and the RateFrac module in Aspen Plus, and validated as compared to the present experimental results. The modeling results showed that the SO2 loading provided the similar effect on the CO2 mass transfer, the absorption efficiency and the heat of CO2 absorption as compared to the CO2 loading, however, the SO2 loading resulted in lower NH3 volatilization compared to CO2 loading. The lean CO2 loading and the solvent flow rate dynamic adjustment approaches in association with the lean NH3 solvent splitting process were studied to analyze the potential coordination of the combined absorption process and the sulfite treatment system. Maintaining 85% CO2 capture efficiency was possible when SO2 loading was increased from 0.1 to 0.2 S/N by reducing the lean CO2 loading from 0.2 to 0.088 C/N or increasing the solvent flow rate from 8 to 14.1 L/h. The time window for the SO2 treatment by the precipitation process was increased with the increasing split ratio of the lean NH3 solvent splitting process that was associated with the dynamic adjustment approaches. In the present study, the discussion of the combined absorption experiments using the CO2 and SO2 loaded NH3 solvent, the developed rate-based model, and the operation strategies provided valuable contributions to the advancement of the combined CO2 and SO2 capture process.

Experimental Studies and Rate-Based Simulations of CO2 Absorption with Aqueous Ammonia and Piperazine Blended Solutions

CO2 Capture Using Piperazine-Promoted, Aqueous Ammonia Solution: Rate-based Modelling and Process Simulation

Rate-Based Modelling and Simulation of Large-Scale CO2 Capture Using a Piperazine-Promoted Aqueous Ammonia Solution

Performance of CO2 Absorption in a Spray Tower Using Blended Ammonia and Piperazine Solution: Experimental Studies and Comparisons

Study on Mass Transfer and Kinetics of CO2 Absorption into Aqueous Ammonia and Piperazine Blended Solutions

A Combined Experimental and Computational Study on the Shuttle Mechanism of Piperazine for the Enhanced CO2 Absorption in Aqueous Piperazine Blends

Deciphering the Transfer Mechanisms for CO2 Absorption into Binary Blended Solutions

[Experimental Study on CO2 Absorption by Aqueous Ammonia-Based Blended Absorbent].

Process Simulation for CO2 Capture with the Aqueous Solution of 1-Methylpiperazine and Its Mixture with Piperazine

Modeling and Analysis of CO2 Capture by Aqueous Ammonia + Piperazine Blended Solution in a Spray Column

Absorption of CO2 by Mixed Solution of Piperazine and Its Derivatives with 2-(Aminoethylamino) Ethanol

Simulation and Performance Comparison for CO2 Capture by Aqueous Solvents of N-(2-Hydroxyethyl) Piperazine and Another Five Single Amines

Numerical Investigation On Co2 Absorbed In Aqueous N-Methyldiethanolamine Plus Piperazine

Modeling and validation of carbon dioxide absorption in aqueous solution of piperazine + methyldiethanolamine by PC-SAFT and E-NRTL models in a packed bed pilot plant: Study of kinetics and thermodynamics

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Assessment of carbon dioxide separation by amine solutions using electrolyte non-random two-liquid and Peng-Robinson models: Carbon dioxide absorption efficiency

Ab Intio Calculations on Reaction Process of Piperazine Absorbing CO2

Study on Co2 Absorption by Aqueous Benzylamine and Its Formulations with Monoethanolamine As A Component for Post-Combustion Capture Process

Rate-Based Modeling of CO2 Absorption in Aqueous NH3 in a Packed Column

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine