Abstract:Using a new kind of absorbent which is the mixture of aqueous ammonia and ethanol, a process of carbon capture by ammonia of low concentration with reinforced crystallization and lower energy consumption is presented. By the application of antisolvent crystallization to reinforce crystallization process, low energy consumption of regeneration could be achieved easily due to saving the energy to heat the water of carbonized ammonia in the desorption process. TGA is adopted to study the regeneration process of crystal product, and heating method pyrolysis and constant temperature pyrolysis are used respectively. What' s more, if the waste heat from the power plant can be used as heat source of the regeneration process, the more energy can be saved for the technology. With the regeneration temperature between 40 ℃and 80 ℃, the active energy can be as low as 48.38 kJ/mol. The regeneration process is studied at the constant temperature of 60℃, 80℃ and 100℃. And if the rate of rising temperature is 5 K/min, the crystal product will be totally decomposed when the temperature reaches 80℃,not only can achieve low energy consumption but also have fast regeneration rate which have the advantage over the process of rich carbonated ammonia. For the mixed absorbent, the different proportion of the dissolved agent has little effect on the regeneration process, and the composition of the mixture is determined only by the absorption rate. The better regeneration rate can be obtained by the constant temperature of 80 ℃. After the calculation of 16 classical models, the model function was selected for the study of crystal products.

Two kinds of new carbon capture technology by ammonia based on reinforced crystallization

Carbon capture by ammonia with reinforced crystallization

A new technique of carbon capture by ammonia with the reinforced crystallization at low carbonized ratio and initial experimental research

Effect of carbonized ammonia constituent on the crystallization process

Study on Characteristics of Crystallization Kinetics of Carbon Capture by Mixed Absorbent Contained Aqua Ammonia and Ethyl Alcohol

Regenerative process analysis of the new carbon capture technique based on mixed absorbent

Study on Regenerative Process of the New Carbon Capture Technique Based on Antisolvent Crystallization to Strengthen Crystallization

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Experimental Study on Carbon Dioxide Absorption by Aqueous Ammonia with Nickel and Chromium Ions in Bubbling Tower at Low Temperatures

Exploration of Ammonia Resorption Cycle for Power Generation by Using Novel Composite Sorbent

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Optimization of the Process of Antisolvent Crystallization of Carbonized Ammonia with a Low Carbon-to-nitrogen Ratio

Development of a novel process for aqueous ammonia based CO 2 capture

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

Thermodynamic Properties in Ternary System of NH4HCO3–H2O–ethanol Based on Antisolvent Method to Strengthen Crystallization of Carbonized Ammonia

Research Progress of Aqueous Amine Solution for CO2 Capture: A Review

Biochar Synergistic New Ammonia Capture of CO<sub>2</sub> and High-Value Utilization of Intermediate Products

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Reducing aerosol and ammonia emission in post-combustion CO 2 capture: Additives as key solutions

Experimental Study on Regeneration Characteristic of CO2-rich Ammonia Solution and Absorption Characteristics of the Regenerative Solution

A novel process for capturing carbon dioxide using aqueous ammonia