Abstract:CO2 capture using amine-based solvent is now available for large scale deployment. Water balance and amine emission are drawing more and more attention as they have significant impacts on operation stability, economic cost and environmental pollution. However, experimentally investigating a new amine solvent in a demonstration test platform is time-consuming and costly. In this paper, a shortcut method was developed based on volatility data of a solvent to evaluate water balance and amine emission in CO2 capture system. Water balance can be achieved by employing a simple water wash after absorber and regulating water wash temperature according to flue gas temperature, CO2 concentration, and CO2 removal efficiency. Simple water wash reduces monoethanolamine (MEA) emission from absorber (215–425 mg/m3) to a level below 5 mg/m3. With constant water wash temperature, increasing absorber temperature condenses more water which is beneficial for reducing amine emission. Variable amines and configurations are also evaluated. Simple water wash is not efficient for those volatile solvents such as 40% 2-amino-2-methyl-1-propanol (AMP), piperazine (PZ)/1-(2-Hydroxyethyl)piperidine (HEPD), MEA/N-methylpyrrolidone (NMP) water-lean solvent, and 2-(diethylamino)ethanol (DEEA)/2-((2-aminoethyl) amino) ethanol (AEEA) biphasic solvent as their amine emissions after simple water wash are still higher than 100 mg/m3. For those solvents with moderate volatility, such as 30%MEA and 30–40%AMP, a second water wash is effective to reduce amine emission below 1 mg/m3. While for those highly volatile solvents, such as PZ/HEPD and DEEA blended biphasic solvents, acid wash for further amine emission reduction may be more competitive in view of capital cost and operation cost.

Simulation of a CO_2 Capture System Using Amine Solutions for Selection of Absorbents

Simulation of CO2 capture using ammonia scrubbing: A comparison with MEA scrubbing

Selection of Blended Solvents for CO2 Absorption from Coal-Fired Flue Gas. Part 1: Monoethanolamine (Mea)-Based Solvents

Experimental And Rate-Based Modeling Study Of Co2 Capture By Aqueous Monoethanolamine

Assessment of carbon dioxide separation by amine solutions using electrolyte non-random two-liquid and Peng-Robinson models: Carbon dioxide absorption efficiency

Process Simulation for CO2 Absorption with Mixed Amine Solution

Optimization of solvent properties for post-combustion CO2 capture using process simulation

Simulation and Analysis of Carbon Dioxide Capture Process with Split Flow Modification Using MDEA/PZ Blend Solution in a Coal-fired Power Plant

Simulation and pilot plant measurement for CO2 absorption with mixed amines

Hybrid Behaviors of CO2 Absorption into Blended DEEA‐based Solution for the Improvement of Capture Performance

Structure-activity Relationship-based Selection of Amine Solvent for CO2 Capture From Coal-fired Flue Gas

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

Process simulation for CO; absorption with mixed amine solution

Absorption solubility calculation and process simulation for CO; capture

Modelling and Process Analysis of Post-Combustion Carbon Capture with the Blend of 2-Amino-2-methyl-1-propanol and Piperazine

Removal of CO2 from Simulated Flue Gas of Power Plants by Membrane-Based Gas Absorption Processes

Evaluation on water balance and amine emission in CO2 capture

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Simulation and Performance Comparison for CO2 Capture by Aqueous Solvents of N-(2-Hydroxyethyl) Piperazine and Another Five Single Amines

Effect of Solvent Concentration on the Energy Demand of an Absorption-Based Natural Gas Sweetening Plant

Mixed Amine Absorbent based on Hollow Fiber Membrane Contactor Removes CO2 from Flue Gas