Abstract:Advancement of the absorbent for CO2 capture is essential in optimizing the performance and reducing the negative environmental effects associated with this technology. Despite ammonia's promise as an absorbent, the volatility limits its practical application and creates potential environmental pollution. Therein, we assess various additives (amino acids, carbonates, and alkanolamines) for ammonia-based solvents using multi-stage circulation absorber from the viewpoints of aerosol emission, ammonia emission, and CO2 capture efficiency. Experimental findings reveal that ammonia volatilization can be inhibited by the protonation of free ammonia by carboxyl groups and the formation of hydrogen bonding between amino/hydroxyl groups and ammonia, with ammonia emission reduced by 21.7 %, aerosol emission reduced by 26.5 %, and CO2 capture efficiency increased to a maximum of 87.8 % under the condition of adding histidine. Moreover, the experiment highlights a positive correlation between total ammonia emission and aerosol concentration/diameter. Additionally, tests combining source abatement with water wash exhibit up to 50.5 % aerosol removal efficiency and up to 76.6 % ammonia removal efficiency. To further mitigate emissions, a comprehensive approach is proposed, achieving an 84.4 % reduction in ammonia emission and a 61.9 % reduction in aerosol emission. Finally, a method for recycling ammonia for desulfurization is suggested.

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Pilot-Scale Experimental Study on the CO2 Capture Process with Existing of SO2: Degradation, Reaction Rate, and Mass Transfer

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Simulation of CO2 capture using ammonia scrubbing: A comparison with MEA scrubbing

Process simulations of large-scale CO2 capture in coal-fired power plants using aqueous ammonia solution

Absorber Corrosion Performance for CO_2 Capture Using an Amine Absorbant in a Coal-Fired Power Plant

Simultaneous Absorption of SO2 and CO2 from Flue Gas Using Aqueous Ammonia

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Simulation of a CO_2 Capture System Using Amine Solutions for Selection of Absorbents

Experimental Research Of Co2 Removal By Ammonia Solutions From Flue Gas Of Coal-Fired Power Plant

Simulation and Optimization of Carbon Dioxide Capture Using Water-Lean Solvent from Industrial Flue Gas

Semi-batch experimental study on CO2 absorption characteristic of aqueous ammonia

Research and Design Experience of a 150 Kt/A Co2 Capture and Purification Project in the Shaanxi Guohua Jinjie Power Plant

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Post-Combustion CO2 Capture Demonstration Using Supported Amine Sorbents: Design and Evaluation of 200 Kwth Pilot

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

Pilot-Scale Experimental Study of a New High-Loading Absorbent for Capturing CO2 from Flue Gas

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Experimental study on the influence of SO2 on the CO2 capture process

Research progress of CO2 capture by using ammonia from flue gas of power plant