Abstract:In the realm of postcombustion carbon capture, diethylenetriamine (DETA), recognized for its substantial CO2 absorption capacity, presents a formidable challenge due to its corrosive impact on equipment. This study delves into the corrosion behavior of 20# carbon steel immersed in DETA solutions under varying conditions, employing weight loss and electrochemical methods. The investigation incorporates scanning electron microscopy/energy-dispersive spectroscopy and X-ray diffraction analyses for characterization. Corrosion experiments were also conducted in monoethanolamine (MEA) solutions for a comparative analysis. Results from the corrosion tests in DETA solutions mirror the temperature-dependent corrosion rate (CR) observed in MEA. However, a distinctive trend emerges as the CO2 loading of DETA increases from 0.2 mol CO2/mol amine to 1.2 mol CO2/mol amine, leading to a continuous decrease in the CR of carbon steel-contrary to MEA solutions. This anomaly is attributed to DETA's robust complexing ability with metal ions and its elevated solubility of Fe2+ in solution. Additionally, an examination of the corrosion mechanism in the presence of oxygen was conducted through characterizing the specimen surface and solution precipitates postexperiment. The absence of a protective FeCO3 layer can be attributed to insufficient concentrations of free Fe2+ and CO32- in the solution, failing to achieve the minimum saturation required for protective film formation. The insights gained from studying the corrosion behavior of carbon steel in DETA solutions lay the groundwork for subsequent developments in corrosion inhibitors.

Absorber Corrosion Performance for CO_2 Capture Using an Amine Absorbant in a Coal-Fired Power Plant

Corrosion Behavior of Carbon Steel at Typical Positions of an Amine-Based CO2 Capture Pilot Plant

Corrosion and degradation performance of novel absorbent for CO2 capture in pilot-scale

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Study on Corrosion in CO2 Chemical Absorption Process Using Amine Solution

Pilot-Scale Experimental Study on the CO2 Capture Process with Existing of SO2: Degradation, Reaction Rate, and Mass Transfer

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Kinetics and mass transfer of carbon dioxide absorption into aqueous ammonia

Pilot-Scale Experimental Study of a New High-Loading Absorbent for Capturing CO2 from Flue Gas

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Development and property study of two-phase absorbent for carbon capture in coal-fired flue gas

Corrosion Performance of A3 Carbon Steel in 30wt.% Mea and Amp-Mea Blends for Post-Combustion Carbon Capture: Effect and Mechanism of Corrosion Inhibitors

Corrosion Behavior of Carbon Steel in Diethylenetriamine Solution for Post-combustion CO2 Capture.

Simulation of CO2 capture using ammonia scrubbing: A comparison with MEA scrubbing

Recent Advances in the Research of High-temperature CO2 Adsorbents and Absorbents

Experimental Comparison of Flue Gas CO_2 Separation with Membrane Absorption and Chemical Absorption

Structure-activity Relationship-based Selection of Amine Solvent for CO2 Capture From Coal-fired Flue Gas