Abstract:Global carbon dioxide emissions are rising and the use of fossil fuels in several sectors are the leading causes. As global population and economies continue to grow significantly, the most practical method of lowering such emissions is to capture CO2. Although other technologies are more developed, adsorption is very promising and has attracted much attention. To ensure this technology's success, it is essential to have suitable CO2 adsorbent materials. In this work, several new hydrotalcites (HTs) with different initial concentrations of ion precursors were prepared for the first time by the co-precipitation method—it was possible to verify that the ion concentrations influence the characteristics of the materials. The prepared HTs were characterized by thermogravimetric analysis (TG), X-Ray diffraction (XRD), surface area measurements and temperature-programmed desorption of CO2 (TPD-CO2) to relate their CO2 capture capacity to their physicochemical properties; the CO2 adsorption equilibrium isotherms were determined at 35 and 300 °C for the prepared samples, as well as for some commercial materials: magnesium oxide, calcium oxide, aluminium oxide and Zeolite 13X. After determining which materials present the best CO2 adsorption capacity, these were submitted to adsorption-desorption cycles to study their stability. The main objective of the work was to prepare and study different CO2 adsorbents for processes that are carried out at low and intermediate temperatures. From the experimental results, it was possible to conclude that the Zeolite 13X showed the best capacity at 35 °C, 3.38 mmol·g−1 (@= 1 bar), and a prepared calcined HT (c-HT2) was the best at 300 °C, 0.97 mmol·g−1 (@= 1 bar). Moreover, it seems there is an optimum initial concentration of the ions' solutions for the tested HTs, which depends on the final application—c‐HT1 showed a better capacity at 35 °C and c‐HT2 at 300 °C. From the adsorption‐desorption cycles—performed at 35 and 300 °C with the best materials using a magnetic suspension microbalance at 1 bar of CO2 partial pressure —, a working cyclic capacity of 2.69 mmol∙g−1 was achieved by the Zeolite at 35 °C; in turn, c-HT2 showed a working cyclic capacity of 0.79 mmol∙g−1 at 300 °C.

Recent Advances in the Research of High-temperature CO2 Adsorbents and Absorbents

Ca based high temperature CO2 absorbents for sorption enhanced reforming process

The effect of BeO on heat transfer and durability of nano-CaO-based CO<sub>2</sub> adsorbents

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

Recent Developments and Consideration Issues in Solid Adsorbents for CO 2 Capture from Flue Gas

A High Adsorption Capacity Bamboo Biochar for CO2 Capture for Low Temperature Heat Utilization

Porous Adsorption Materials for Carbon Dioxide Capture in Industrial Flue Gas

Research Progress of Adsorbents for Carbon Dioxide

High-temperature CO 2 sorbents with citrate and stearate intercalated Ca–Al hydrotalcite-like as precursor

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Research on Modern CO2 Absorption Process

The Advances of Adsorbents in the Field of CO_2 Capture

High Temperature Adsorption of SO2 on Mixed Oxides Derived from CaAl Hydrotalcite-Like Compounds

Preparation and Characterization of Materials for Low- to Intermediate-Temperature CO2 Adsorption

Study on CO2 Capture Performance by Potassium-Promoted MgAl-Hydrotalcite Adsorbent

Adsorption,capture and Separation of CO2 by Carbon-Based Adsorbents

Research Progress on Phase Change Absorbents for CO2 Capture in Industrial Flue Gas: Principles and Application Prospects

Efficient MgO-based Mesoporous CO2 Trapper and Its Performance at High Temperature.

Amine‐modified acid‐activated attapulgite as efficient and stable adsorbents for CO2 capture from flue gas

Recent Progress on Porous Carbons for Carbon Capture

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice