Abstract:Global carbon dioxide emissions are rising and the use of fossil fuels in several sectors are the leading causes. As global population and economies continue to grow significantly, the most practical method of lowering such emissions is to capture CO2. Although other technologies are more developed, adsorption is very promising and has attracted much attention. To ensure this technology's success, it is essential to have suitable CO2 adsorbent materials. In this work, several new hydrotalcites (HTs) with different initial concentrations of ion precursors were prepared for the first time by the co-precipitation method—it was possible to verify that the ion concentrations influence the characteristics of the materials. The prepared HTs were characterized by thermogravimetric analysis (TG), X-Ray diffraction (XRD), surface area measurements and temperature-programmed desorption of CO2 (TPD-CO2) to relate their CO2 capture capacity to their physicochemical properties; the CO2 adsorption equilibrium isotherms were determined at 35 and 300 °C for the prepared samples, as well as for some commercial materials: magnesium oxide, calcium oxide, aluminium oxide and Zeolite 13X. After determining which materials present the best CO2 adsorption capacity, these were submitted to adsorption-desorption cycles to study their stability. The main objective of the work was to prepare and study different CO2 adsorbents for processes that are carried out at low and intermediate temperatures. From the experimental results, it was possible to conclude that the Zeolite 13X showed the best capacity at 35 °C, 3.38 mmol·g−1 (@= 1 bar), and a prepared calcined HT (c-HT2) was the best at 300 °C, 0.97 mmol·g−1 (@= 1 bar). Moreover, it seems there is an optimum initial concentration of the ions' solutions for the tested HTs, which depends on the final application—c‐HT1 showed a better capacity at 35 °C and c‐HT2 at 300 °C. From the adsorption‐desorption cycles—performed at 35 and 300 °C with the best materials using a magnetic suspension microbalance at 1 bar of CO2 partial pressure —, a working cyclic capacity of 2.69 mmol∙g−1 was achieved by the Zeolite at 35 °C; in turn, c-HT2 showed a working cyclic capacity of 0.79 mmol∙g−1 at 300 °C.

High-temperature CO 2 adsorption on Li XZr YO Z ceramics

Properties of a Nano CaO/Al2O3 CO2 Sorbent

Combined CO2-philicity and Ordered Mesoporosity for Highly Selective CO2 Capture at High Temperatures

Density functional theory study of high-temperature CO2 adsorption by Li2ZrO3: Effect of typical flue gas components on adsorption energy and electronic properties

Synthesis and CO2 Adsorption Characteristics of Lithium Zirconates with High Lithia Content

Recent Advances in the Research of High-temperature CO2 Adsorbents and Absorbents

High-Temperature Co2 Capture on Li6zr2o7: Experimental and Modeling Studies

Efficient MgO-based Mesoporous CO2 Trapper and Its Performance at High Temperature.

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

The Study Of Li2zro3 Used For Absorption Of Co2 At High Temperature

Synthesis of zeolite molecular sieve 13X from coal-fired slag for efficient room temperature CO2 adsorption

Zeolite Apgiia for Adsorption Based Carbon Dioxide Capture

Synthesis and CO2-absorption properties of lithium zirconate

Synthesis and Adsorption Process of Lithium Taking Used as High-Temperature CO2 Sorbents

Preparation and Characterization of Materials for Low- to Intermediate-Temperature CO2 Adsorption

High-temperature CO 2 sorbents with citrate and stearate intercalated Ca–Al hydrotalcite-like as precursor

Syntheses And Structures Of Lithium Zirconates For High-Temperature Co2 Absorption

Three-step Calcination Synthesis of High-Purity Li8ZrO6 with CO2 Absorption Properties.

Novel Li4SiO4-based Sorbents from Diatomite for High Temperature CO2 Capture

Layered Double Oxide/activated Carbon-Based Composite Adsorbent for Elevated Temperature H 2 /CO 2 Separation

The Effect of Na2ZrO3 Synthesis Method on the CO2 Sorption Kinetics at High Temperature