Abstract:The steel industry generates 7-9 % of the world's anthropogenic carbon emissions. Carbon capture, utilization, and storage (CCUS) technologies for low carbon emissions from the steel industry have attracted research attention. Chemical absorption is the most mature and widely used carbon capture method, and reducing the energy consumption of this technology is currently a research hotspot. This work focused on the development of amine blends suitable for carbon capture in a top gas recycling-oxygen blast furnace (TGR-OBF) for low-carbon steelmaking and further reduction of carbon emissions. The effects of piperazine (PZ) and its derivatives on methyldiethanolamine (MDEA) activation were explored. PZ and 2-(piperazin-1-yl)ethanamine (AEP) most significantly activated MDEA. The best absorption and regeneration performance was achieved with aqueous amine solutions at the MDEA:PZ and MDEA:AEP ratios of 5:3 and 1:1, respectively. Blast furnace gas is rich in CO, and we verified that CO does not significantly affect the overall performance of the aqueous amine solution. The maximum absorption rate of the developed MAA absorbent was similar to that of 30 wt% monoethanolamine (MEA), and at 20 % and 35 % CO2, the cyclic capacities were 1.57 and 1.47 times greater than that of 30 wt% MEA, while the maximum regeneration rates were 2.13 and 1.92 times greater than those of 30 wt% MEA, respectively. A bench-scale CO2 capture experiment performed at a flow rate of 4 Nm(3)/h verified the scale-up application potential of the absorbent. The regeneration energy of MAA under the optimal operating conditions was 2.86 GJ/ton CO2, which was 28.5 % lower than that of 30 wt% MEA. Moreover, MAA displayed a lower latent heat and lower reaction heat. The developed MAA absorbent has great adaptability and low regeneration energy and is expected to be applied in the steel industry to effectively reduce blast furnace carbon emissions.

Corrosion Performance of A3 Carbon Steel in 30wt.% Mea and Amp-Mea Blends for Post-Combustion Carbon Capture: Effect and Mechanism of Corrosion Inhibitors

Corrosion Performance of Carbon/stainless Steel in Amine‐based Solvents under Different Conditions for CO2 Chemical Absorption Process

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

Corrosion Behavior of Carbon Steel in Diethylenetriamine Solution for Post-combustion CO2 Capture.

An Overview on the Corrosion Mechanisms and Inhibition Techniques for Amine-Based Post-Combustion Carbon Capture Process

Study on Corrosion in CO2 Chemical Absorption Process Using Amine Solution

Synthesis of Tertiary Amines and Their Inhibitive Performance on Carbon Steel Corrosion

Corrosion Behavior of Carbon Steel at Typical Positions of an Amine-Based CO2 Capture Pilot Plant

Corrosion Inhibition of A3 Steel by Imidazoline Derivative in 2·0%nacl Solution

THE SYNERGISTIC EFFECT OF MODIFIED IMIDAZOLINE COMPOUND AND ALKYL-PHOSPHATE ESTER AS CORROSION INHIBITORS

A Study of Designer Amine 4-Amino-1-propyl-piperidine Against the Corrosion of Carbon Steel for Application in CO2 Capture

Effects of Flue Gas Composition on Carbon Steel (1020) Corrosion in Mea-Based Co2 Capture Process

New Corrosion Inhibitor Acrylamide Methyl Ether for Mild Steel in 1 M Hcl

Development of Carbon Capture Absorbents for Top Gas Recycling-Oxygen Blast Furnace in the Steel Industry

Corrosion inhibition capacity of non-phosphorus corrosion inhibitor in water with moderate alkalinity and moderate hardness for A3 carbon steel

Investigation on the Performance of EDA-based Blended Solvents for Electrochemically Mediated CO2 Capture

Study on the Synergistic Inhibition Effect of Imidazoline and Mercaptoethanol on the Corrosion of Carbon Steel in Tarim Oilfield

Absorber Corrosion Performance for CO_2 Capture Using an Amine Absorbant in a Coal-Fired Power Plant

Aminoethanesulfonic Acid- Based Blends for Inhibition of J55 Steel Corrosion in Simulated Oilfield Pickling Fluid

The Synergistic Inhibition Effect Between Imidazoline and 2-Mercaptoethanol on Carbon Steel Corrosion in CO2-saturated 3.5% NaCl Solution

Effect of Molecular Structure of Thio-Chemicals on Corrosion Inhibition in CO<sub>2</sub> Corrosive Environments