Abstract:Combined CO2 and SO2 absorption performance in a new combined capture process was evaluated in this work by experimental study using a lab-scale packed column system and a developed rate-based model in Aspen Plus. The combined absorption experiments were carried out to identify the impact of several key operating parameters, including flue gas SO2 and CO2 concentrations, CO2 and SO2 loadings, the absorption temperature, and the L/G ratio, on CO2 absorption and NH3 volatilization. Experimental results indicated that 85% CO2 absorption efficiency was achieved in 5 wt% aqueous NH3 solvent containing lean CO2 loading at 0.2 mol CO2/mol NH3 (C/N) and SO2 loading at 0.1 mol SOilmol NH3 (S/N). The rate-based model was developed using the electrolyte-NRTL method and the RateFrac module in Aspen Plus, and validated as compared to the present experimental results. The modeling results showed that the SO2 loading provided the similar effect on the CO2 mass transfer, the absorption efficiency and the heat of CO2 absorption as compared to the CO2 loading, however, the SO2 loading resulted in lower NH3 volatilization compared to CO2 loading. The lean CO2 loading and the solvent flow rate dynamic adjustment approaches in association with the lean NH3 solvent splitting process were studied to analyze the potential coordination of the combined absorption process and the sulfite treatment system. Maintaining 85% CO2 capture efficiency was possible when SO2 loading was increased from 0.1 to 0.2 S/N by reducing the lean CO2 loading from 0.2 to 0.088 C/N or increasing the solvent flow rate from 8 to 14.1 L/h. The time window for the SO2 treatment by the precipitation process was increased with the increasing split ratio of the lean NH3 solvent splitting process that was associated with the dynamic adjustment approaches. In the present study, the discussion of the combined absorption experiments using the CO2 and SO2 loaded NH3 solvent, the developed rate-based model, and the operation strategies provided valuable contributions to the advancement of the combined CO2 and SO2 capture process.

Simultaneous Absorption of SO2 and CO2 from Flue Gas Using Aqueous Ammonia

Impact of SO2 on CO2 capture in coal-fired flue gas using aqueous ammonia

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

Pilot-Scale Experimental Study on the CO2 Capture Process with Existing of SO2: Degradation, Reaction Rate, and Mass Transfer

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Modeling and Economic Analysis on Combined Capture of CO2 and SO2 in Flue Gas Using Aqueous Ammonia

Experimental Study and Modified Modeling on Effect of SO2 on CO2 Absorption Using Amine Solution

Absorption of carbon dioxide in aqueous ammonia

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Effects of SO2 on CO2 capture using a hollow fiber membrane contactor

Semi-batch experimental study on CO2 absorption characteristic of aqueous ammonia

Simulation of CO2 capture using ammonia scrubbing: A comparison with MEA scrubbing

Carbon Dioxide Absorption in a Fabricated Wetted-Wall Column Using Varying Concentrations of Aqueous Ammonia

Performance and mechanism of CO2 absorption during the simultaneous removal of SO2 and NO by wet scrubbing process

Kinetics and mass transfer of carbon dioxide absorption into aqueous ammonia

Experimental Research Of Co2 Removal By Ammonia Solutions From Flue Gas Of Coal-Fired Power Plant

Experimental study on the influence of SO2 on the CO2 capture process

Simultaneous wet absorption of SO2 and NOX with mixed Na2SO3 and (NH4)2SO3: Effects of mass concentration ratio and pH

Simulation of a CO_2 Capture System Using Amine Solutions for Selection of Absorbents

Research progress of CO2 capture by using ammonia from flue gas of power plant