Industrial-Scale Experiments Of Desulfuration Of Coal Flue Gas Using A Pulsed Corona Discharge Plasma
Jie Li,Yan Wu,Ninghui Wang,Guofeng Li,Qiunan Huang
DOI: https://doi.org/10.1109/TPS.2003.810188
IF: 1.368
2003-01-01
IEEE Transactions on Plasma Science
Abstract:The flow rate of flue gas in the industrial experiments was 3000 Nm(3)/h. The flue gas from the boiler burning coal was used. The influences of operating parameters on the efficiency of desulfuration (DeSO(2)) were studied, which include the retention period of flue gas in the reactor, the initial concentration of SO2 in flue gas, a mole ratio of NH3 to SO2 in the gas, the temperature of the gas, as well as the power consumption of pulsed corona discharges. The experimental results shown that the efficiency of DeSO2 was above 80%, when the initial concentration of SO2 was 1000similar to2000 ppm, the gas temperature was 60 degreesCsimilar to75 degreesC, the retention period was more than 5.8 s, a mole ratio of NH3 to SO2 was 2:1, the water content in flue gas was above 6%, and the consumption was 2.5-3.5 Wh/Nm(3).