Abstract:The flue gas desulfurization reactor by spray drying adsorption plays a crucial role in the process of gas purification. This study employed the multi-phase particle-in-cell method to accurately model the three-dimensional motion of particles of different sizes in the flue gas desulfurization reactor. The double-film theory was utilized to simulate the heat and mass transfer processes of desulfurization slurry droplets. Additionally, this study conducted a comprehensive analysis of various factors affecting gas-solid flow and mass transfer processes, including flue gas inlet velocity and temperature, Ca/S molar ratio, slurry particle size, and slurry temperature. The results demonstrate that the simulated and experimental results are in good agreement, validating the reliability of the developed model. The axial mass fluxes of gas and particles exhibit contrasting distributions in the central part and near the wall, with the turbulent viscosity being particularly pronounced in the top nozzle region. The inlet velocity of flue gas has a limited effect on the axial mass flux of particles, whereas the Ca/S molar ratio exerts a more significant influence. Furthermore, the Ca/S molar ratio has a substantial impact on the spatial distribution of flue gas temperature. The inlet velocity of flue gas and slurry particle size are negatively and positively correlated with particle residence time, respectively. Based on the mass transfer characteristics, the reactor interior can be divided into three zones: a high-efficiency desulfurization zone, a low-efficiency desulfurization zone, and a partial desulfurization zone. For the investigated operating conditions, the desulfurization efficiency is most strongly influenced by the slurry particle size, followed by the flue gas inlet velocity, Ca/S molar ratio, flue gas inlet temperature, and slurry temperature.

Modeling on circulating fluidized bed flue gas desulfurization

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED

Mathematical model for multi-level humidifying of the circulating fluidized bed-flue gas desulfurization system

[Intermediate Experiment and Mechanism Analysis of Flue Gas Desulfurization Technology by Circulating Fluidized Bed].

Influence of Chemical and Thermodynamic Parameters on the Flue Gas Desulphurization Efficiency in a Circulating Fluidized Bed

Slurry Evaporation of Flue Gas Desulphurization System in Circulating Fluidized Bed

Dominant influence parameters on the FGD efficiency and desulfurization mechanism in circulating fluidized bed in ambient temperature

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

The Modeling of Flue Gas Desulphurization in Magnetically Fluidized Bed

Numerical and Experimental Study on Flue Gas Desulfurization in the Underfeed Circulating Spouted Bed

Cold-modeling Study of a Circulating Fluidized Bed Reactor for Flue Gas Desulfurization (FGD)

Experimental Study On Medium Temperature Dry Flue Gas Desulphurization By Using Active Sorbent In Circulating Fludized Bed

A study of experimental and improved absorption model for the spray towers of wet flue gas desulfurization

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion

Eulerian–Eulerian Numerical Study of the Flue Gas Desulfurization Process in a Semidry Spouted Bed Reactor

CFD-DEM simulations of a gas-solid-liquid fluidization system: Effects on the flow field and particle behavior of semi-dry desulfurization fluidized bed

Numberical Simulation Study of Flue Gas Desulphurization by Spray Drying

STUDY ON DESULFURIZATION CHARACTERISTIC IN CaO ACTIVATION REACTOR OF LIMESTONE INJECTION FGD SYSTEM Ⅰ--MATHEMATICS MODEL

Modeling Study on the Impaction and Humidification Process in Desulfurization Activation Reactor

Integrated Modeling of Semi-dry Flue Gas Desulfurization

Mass Transfer and Reaction Process of the Wet Desulfurization Reactor with Falling Film by Cross-Flow Scrubbing