Abstract:The flue gas desulfurization reactor by spray drying adsorption plays a crucial role in the process of gas purification. This study employed the multi-phase particle-in-cell method to accurately model the three-dimensional motion of particles of different sizes in the flue gas desulfurization reactor. The double-film theory was utilized to simulate the heat and mass transfer processes of desulfurization slurry droplets. Additionally, this study conducted a comprehensive analysis of various factors affecting gas-solid flow and mass transfer processes, including flue gas inlet velocity and temperature, Ca/S molar ratio, slurry particle size, and slurry temperature. The results demonstrate that the simulated and experimental results are in good agreement, validating the reliability of the developed model. The axial mass fluxes of gas and particles exhibit contrasting distributions in the central part and near the wall, with the turbulent viscosity being particularly pronounced in the top nozzle region. The inlet velocity of flue gas has a limited effect on the axial mass flux of particles, whereas the Ca/S molar ratio exerts a more significant influence. Furthermore, the Ca/S molar ratio has a substantial impact on the spatial distribution of flue gas temperature. The inlet velocity of flue gas and slurry particle size are negatively and positively correlated with particle residence time, respectively. Based on the mass transfer characteristics, the reactor interior can be divided into three zones: a high-efficiency desulfurization zone, a low-efficiency desulfurization zone, and a partial desulfurization zone. For the investigated operating conditions, the desulfurization efficiency is most strongly influenced by the slurry particle size, followed by the flue gas inlet velocity, Ca/S molar ratio, flue gas inlet temperature, and slurry temperature.

NUMERICAL SIMULATION OF FLUE GAS DESULPHURIZATION PROCESS IN A CIRCULATING FLUIDIZED BED

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED

Modeling on circulating fluidized bed flue gas desulfurization

NUMERICAL SIMULATION OF THE DENSE TWO-PHASE FLOW IN A GAS-PARTICLE CIRCULATING FLUIDIZED BED

BASIS OF MODERATE TEMPERATURE FLUE GAS DESULPHURIZATION PROCESSES IN CFB DRAG FORCE MODEL AND NUMERICAL RESEARCH OF TWO-PHASE FLOWS

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion

CFD-DEM simulations of a gas-solid-liquid fluidization system: Effects on the flow field and particle behavior of semi-dry desulfurization fluidized bed

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Slurry Evaporation of Flue Gas Desulphurization System in Circulating Fluidized Bed

Numerical Simulation of Gas-particle Hydrodynamics in CFB

Performance Optimization of Wet Flue Gas Desulphurization System Based on CFD Technology

Numerical analysis of SO 2 removal characteristics in industrial flue gas desulfurization reactor by spray drying adsorption

Numerical Simulation of Gas-Particle Dense Flow with LES/VFDF/SC Model

Numerical study on key issues in the Eulerian-Eulerian simulation of fluidization with wide particle size distributions

Modeling of Dense Particle-Gas Two-phase Reacting Flow in Lagrangian Approach

CFD simulation and optimization of flow field and SO2 absorption in impinging stream scrubber

Numerical Simulation of Wet Limestone-Gypsum Flue Gas Desulfurization System