Abstract:A novel Eulerian–Lagrangian approach based on the multi-phase particle-in-cell (MP-PIC) methodology was applied in the simulation of the hydrodynamic behavior of pressurized high-flux circulating fluidized beds (DHFCFBs) in this work. The sensitivities of key model (i.e. the drag model) and modeling parameters (particle–particle restitution coefficient, normal particle–wall restitution coefficient, and tangential particle–wall restitution coefficient) on the predictions have been tested systematically. Experimental results of Richtberg et al. [Powder Technol. 2005, 155(2), 145–152] and Yin et al. [Chem. Eng. Technol. 2012, 35(5), 904–910] were used as a numerical benchmark to assess the simulations quantitatively. The results show that the Gidaspow drag model displays better agreement with both the axial profiles of pressure drop and the radial distributions of particle volume fraction. Compared with the perfectly elastic particle collision (ep=1.0), the non-ideal particle–particle interaction could get more reasonable prediction results. The particle–wall restitution coefficient has somewhat of an effect on the simulated gas–solid flow behaviors in the risers. However, no critical changes of simulated flow characteristic in the trends of pressure drop and solid volume fraction distribution have been found. Based on the comparison of simulation results with experiments, a suitable model (i.e., Gidaspow drag model) and a group of modeling parameters, namely a particle–particle restitution coefficient (ep=0.9), a normal particle–wall restitution coefficient (ewn=0.1) and a free-slip boundary condition (i.e. the tangential particle–wall restitution coefficient, ewτ=1.0) for modeling the hydrodynamic behavior in the DHFCDB riser were determined and verified.

BASIS OF MODERATE TEMPERATURE FLUE GAS DESULPHURIZATION PROCESSES IN CFB DRAG FORCE MODEL AND NUMERICAL RESEARCH OF TWO-PHASE FLOWS

Modeling of the Flue Gas Desulfurization in a CFB Riser Using the Eulerian Approach with Heterogeneous Drag Coefficient

Steady-state Simulation of Core-Annulus Flow in a Circulating Fluidized Bed (CFB) Riser

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED

NUMERICAL SIMULATION OF FLUE GAS DESULPHURIZATION PROCESS IN A CIRCULATING FLUIDIZED BED

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

Experimental and model investigation on the mass balance of a dry circulating fluidized bed for flue gas desulfurization system

Modeling on circulating fluidized bed flue gas desulfurization

Modeling of Drag with the Eulerian Approach and EMMS Theory for Heterogeneous Dense Gas–solid Two-Phase Flow

Numerical study on key issues in the Eulerian-Eulerian simulation of fluidization with wide particle size distributions

Numerical Simulation of Particulate Flows in CFB Riser with Drag Corrections Based on Particle Distribution Characterization

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Modeling on the Hydrodynamics of Pressurized High-Flux Circulating Fluidized Beds (phfcfbs) by Eulerian–Lagrangian Approach

Slurry Evaporation of Flue Gas Desulphurization System in Circulating Fluidized Bed

Structure Optimization Of Cfb Reactor For Moderate Temperature Fgd

Modeling of the gas-solid flow in a coal beneficiation fluidized bed

Numerical study of coal gasification in a dual-CFB Plant based on the generalized drag model QC-EMMS

Theoretical modeling of the drag reduction influenced by film boiling heat transfer on a spherical body