Abstract:A moderate-temperature desulfurization process at 600-800 degrees C was studied in a pilot-scale circulating fluidized bed flue gas desulfurization (CFB-FGD) experimental facility with the addition of the internal structure. The rapidly hydrated sorbent and the desulfurization products were analyzed to clarify the influence mechanism of the internal structure on the moderate-temperature desulfurization process. The results show that the desulfurization efficiency with the internal structure at 600-800 degrees C was 74-93% for the calcium to sulfur (Ca/S) molar ratio of 2.0, which was higher than the desulfurization efficiency without the internal structure of 67-83%. As for the calcium-containing compositions, the desulfurization products included about 70% cyclone recirculation sample and about 30% bag filter sample. The cyclone recirculation sample was mainly composed of CaSO4 and CaO. The bag filter sample not only contained high contents of CaSO4 and CaO but also contained a considerable amount of CaCO3 and even some unreacted Ca(OH)(2). With the addition of the internal structure, the calcium conversion rate of the cyclone recirculation sample greatly increased from 42.8 to 47.4% while that of the bag filter sample just increased from 29.4 to 30.7%. It demonstrated that the main contributor for the improved desulfurization efficiency was the cyclone recirculation sample clue to the improved solids concentration distribution and the enhanced gas-solid contact efficiency. The calcium conversion rate for the bag filter sample depended on the solids concentration distribution as well as the particle residence time in the moderate temperature range, which indicated that prolonging the particle residence time for the fresh sorbent and the fall off calcium-containing particles was important to further improve the desulfurization performance. These results provided good guidance for realizing high desulfurization efficiency and low flow resistance in dry FGD processes.

Experimental Study On Medium Temperature Dry Flue Gas Desulphurization By Using Active Sorbent In Circulating Fludized Bed

Dry Desulfurization in a Circulating Fluidized Bed (CFB) with Chain Reactions at Moderate Temperatures

Experimental Study on in Situ Preparation of Supported Sorbent for Moderate Temperature CFB-FGD

Effect of operating parameters and reactor structure on moderate temperature dry desulfurization.

Experimental Study of Semi-dry Flue Gas Desulfurization in Circulating Suspension Fluidized Bed

Influence of Chemical and Thermodynamic Parameters on the Flue Gas Desulphurization Efficiency in a Circulating Fluidized Bed

Modeling on circulating fluidized bed flue gas desulfurization

Characteristics and Reactivity of Rapidly Hydrated Sorbent for Semidry Flue Gas Desulfurization

Experimental Study on the Reuse of Spent Rapidly Hydrated Sorbent for Circulating Fluidized Bed Flue Gas Desulfurization.

Effect of Internal Structure on Flue Gas Desulfurization with Rapidly Hydrated Sorbent in A Circulating Fluidized Bed at Moderate Temperatures

Experimental and model investigation on the mass balance of a dry circulating fluidized bed for flue gas desulfurization system

Experimental Research on the CFB-FGD of Semi-Dry Process in Ambient Temperature in a Demo Plant

Novel Dry-Desulfurization Process Using Ca(OH)2/Fly Ash Sorbent in a Circulating Fluidized Bed

Experimental Study on the Cfb-Fgd of Semi-Dry Process in A Demo Plant

Effect of Solids Concentration Distribution on the Flue Gas Desulfurization Process

Desulfurization Characteristics of Rapidly Hydrated Sorbents with Various Adhesive Carrier Particles for a Semidry CFB-FGD System.

Dominant influence parameters on the FGD efficiency and desulfurization mechanism in circulating fluidized bed in ambient temperature

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion

D306 EXPERIMENTS AND MATHEMATICAL MODEL ON FLUE GAS DESULFURIZATION OF CIRCULATING FLUIDIZED BED

Kinetic model for desulfurization at medium temperature using hydrated absorbent

Experimental Study of the Removal of Fine Particulate Matter and Moisture from Flue Gas