Abstract:SO2 emissions from coal-fired boilers are air pollutants and a source of acid rain, causing extensive environmental pollution. Limestone (CaCO3) is a Ca-based sorbent which is injected into circulating fluidized bed (CFB) boilers, where it combines with SO2 to produce calcium sulfate (CaSO4). As a result, SO2 emissions from a power plant are reduced. In this study, CaCO3 addition was proposed and the desulfurization efficiency improved. The direct desulfurization reaction is dominant in a commercial CFB boiler due to the high CO2 partial pressure, but CaO is formed at a fast reaction rate by calcination in the high temperature or in the low CO2 partial pressure region. When CaO remains in the loop seal, it is exposed to a high CO2 partial pressure condition moving through the recirculation section for an extended period and re-injected into the furnace as recarbonated CaCO3. To analyze the direct desulfurization reaction kinetics, a shrink core model in which the reaction proceeds inside the particle was adopted. Surface observations through FE-SEM of CaSO4 produced by the 180 minute long desulfurization experiment using TGA suggest that the CaSO4 crystal growth rate increased after the pre-treatment (recarbonation) of limestone. Recarbonation lowered the limestone crystallinity, causing a faster reaction. The CaCO3 recarbonation increased the Ca utilization by more than 20% when the direct desulfurization reaction occurred. The TGA experiments show that recarbonation contributes to CaSO4 conversion. Increasing the desulfurization efficiency using recarbonation can reduce the fixed investment and operating costs of oxy-fuel CFB plants because only desulfurization in the furnace is able to meet SO2 emission regulations or lower the flue gas desulfurization (FGD) dependence. Accordingly, the desulfurization conversions of recarbonated CaCO3 and limestone were compared in this study. Morphological changes in the limestone were also evaluated using XRD, FE-SEM, and other analysis methods.

Dry Desulfurization in a Circulating Fluidized Bed (CFB) with Chain Reactions at Moderate Temperatures

Novel Dry-Desulfurization Process Using Ca(OH)2/Fly Ash Sorbent in a Circulating Fluidized Bed

Experimental Study On Medium Temperature Dry Flue Gas Desulphurization By Using Active Sorbent In Circulating Fludized Bed

Effect of operating parameters and reactor structure on moderate temperature dry desulfurization.

Experimental Study on in Situ Preparation of Supported Sorbent for Moderate Temperature CFB-FGD

THE EFFICIENCY OF CO2 AND NO TO DRY DESULFURIZATION PROCESS AT MEDIUM TEMPERATURE

Desulfurization Characteristics of Rapidly Hydrated Sorbents with Various Adhesive Carrier Particles for a Semidry CFB-FGD System.

Effect of Internal Structure on Flue Gas Desulfurization with Rapidly Hydrated Sorbent in A Circulating Fluidized Bed at Moderate Temperatures

Experimental and model investigation on the mass balance of a dry circulating fluidized bed for flue gas desulfurization system

Sorbent performance under FBC conditions-a thermochemical analysis

Characteristics and Reactivity of Rapidly Hydrated Sorbent for Semidry Flue Gas Desulfurization

Sorbent Performance under FBC Conditions -- A Thermochemical Analysis

Numerical Simulation of Moderate Temperature Desulfurization in Circulating Fluidized Bed Reactor Considering Sorbent Abrasion

Effect of Solids Concentration Distribution on the Flue Gas Desulfurization Process

A comparative evaluation of recarbonated CaCO3 derived from limestone under oxy-fuel circulating fluidized bed conditions

Two-Stage Desulfurization Of Calcium-Based Sorbents During Coal Combustion In The Chain-Grate Furnace

Applications of ultrafine limestone sorbents for the desulfurization process in CFB boilers.

Desulfurization Characteristics of Carbide Slag during Circulating Fluidized Bed Coal Combustion

Desulfurization Characteristics of Fly Ash Recirculation and Combustion in the Circulating Fluidized Bed Boiler

Optimization of CaO Particle Preparation and Performance Tests in a Bench Scale Circulating Fluidized Bed Reactor

Kinetic model for desulfurization at medium temperature using hydrated absorbent