Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

Hydrodynamics in a Novel Gas-Liquid Cocurrent Bubble Reactor and its CFD Simulation

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Evolution and Interaction Characteristics of Liquid Flow and Bubbles in a Jet Bubbling Column

Hydrodynamics in a jet bubbling reactor: Experimental research and mathematical modeling

Computational fluid dynamics simulation of hydrodynamics in an internal-loop fluidized bed reactor with a funnel-shaped internal

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Numerical investigation of gas-liquid flow hydrodynamics in three-dimensional bottom-blown reactor via LES-VOF coupled model

2D and 3d Simulations of Fluid Dynamics in the Bubble Reactor for Liquid Fuel Synthesis: Comparisons Against Experiments

Progress on CFD simulation of gas-liquid two-phase flow in stirred tank reactor

CFD study of mixing characteristics of bubble column and external loop airlift reactor

Modeling and Simulation of Hydrodynamic Bubble-Liquid Turbulent Flows in Bubble-Column Reactors

Water model experiments on bubble motion and bubbly flows in a gas-liquid-liquid multiphase reactor

Hydrodynamics of a Bubble-Induced Inverse Fluidized Bed Reactor with a Nanobubble Tray

Simulation of Flow Law in Mixed Flow Reactor

Local Hydrodynamics in a Gas-Liquid-solid Three-Phase Bubble Column Reactor

Hydrodynamics and Bubble Behaviour in a Three-Phase Two-Stage Internal Loop Airlift Reactor