Abstract:A k-epsilon-Theta-k(p) model was proposed to describe the complicated two-phase flow in downers, taking into account the fast and dense gas-solid flows in downers, transport phenomena caused by turbulence mechanism and collisions between particles, i.e., a k-epsilon turbulence model for gas phase, a k(p) turbulence model, and a kinetic theory description of solid stresses characterized by pseudo-temperature of particles (Theta) for solid phase. A FORTRAN code was developed to solve the steady-state 3D flow fields of two-phase flows numerically. To validate the reliability of the k-epsilon-Theta-k(p) model, the gas-solid flows in (1) the developing and fully developed regions of a downer (140 mm ID) and (2) solids jet development in the entrance region of a downer (92 mm ID) were simulated. The predicted results had satisfactory agreement with a large quantity of experimental data, i.e., axial and radial distributions of local solids fraction, local particle velocity, and pressure. In particular, the above model and corresponding simulations were also implemented successfully using CFX 4.2/4.3, a commercial software developed by AEA Technology Company. Furthermore, the CFX code was applied to predict the radial flow structure in a downer of 418 mm ID, which was validated by the ongoing experiments in the corresponding experimental setup. Further analysis of the simulated data also showed that the diffusion coefficient of particles is strongly correlated with the local solids fraction. A lower solids fraction corresponds to a larger radial diffusion coefficient. With the increase of solids fraction, the diffusion coefficient decreases sharply when the solids fraction is less than 0.05, and then levels off. This means that the local solids fraction has an important effect on the dispersion behavior of particles. This predicted result gives reasonable agreement with the experimental results in the literature.

Axial Flow Pattern in a Concurrent Downflow Fluidized Bed (downer) with Linearly Variable Superficial Gas Velocity

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Axial flow structure at the varying superficial gas velocity in a downer reactor

Investigation of Particle Flow Behaviors in a Simplified Downcomer of Multistage Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Cocurrent gas-solid downflow fluidized bed (downer) reactors: II hydrodynamics

Numerical Simulation of Hydrodynamics in Downers Using a CFD–DEM Coupled Approach

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Solids Axial and Radial Mixing Behavior in Downer with Gas Jet in Reverse Direction

Dynamic Characteristics of Solids Circulation Establishment in Laboratory and Industrial Circulating Fluidized Beds with Sweeping Bend Return

Fundamental Studies on the Hydrodynamics and Mixing of Gas and Solid in A Downer Reactor

Eulerian-Lagrangian simulation of hydrodynamics of gas-solid flows in downer

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Cocurrent gas-solid downflow fluidized bed (downer) reactors: (III). Gas and solid mixing

Evaluation of non-equilibrium transfer-reaction characteristic in downer fluidized beds via simulation based on local structure

CFD simulation of hydrodynamics in downer reactors

Experimental Study on Gas–solid Flow and Heat Transfer Characteristics in Downer Moving Bed