Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

What problem does this paper attempt to address?

This paper mainly discusses the gas-solid flow characteristics in a large-scale dual fluidized bed (DFB) reactor, especially the solid circulation rate. The author establishes a numerical simulation model based on an actual large-scale DFB reactor (maximum height 21.6 meters) and conducts numerical simulations to study the effects of different gas velocities, static bed heights, and particle sizes on pressure distribution, solid suspension density, and solid circulation rate. By comparing experimental data, the accuracy of the numerical simulation model is verified, and the model is used to extend the operating conditions and propose empirical formulas for solid circulation rate applicable to different particle sizes. The study shows that gas velocity and bed height have a significant impact on the solid circulation rate, and particle size has the most significant influence. This research fills the gaps in the study of gas-solid flow characteristics in existing DFB reactors and provides important references for understanding and optimizing the operation of large-scale DFB reactors.

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Effect of Bed Thickness on a Pseudo 2D Gas-Solid Fluidized Bed Turbulent Flow Structures and Dynamics

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Numerical study on key issues in the Eulerian-Eulerian simulation of fluidization with wide particle size distributions

Numerical Simulation of a Packed Bed Reactor with Novel Internals—Ⅰ. Flow Field and Residence Time Distribution of Gas Phase

Dual-dense gas-solid circulating fluidized bed reactor

Numerical Simulation of Gas-solid Hydrodynamics in a 600 MW Supercritical Circulating Fluidized Bed Boiler Furnace

Numerical Simulation of Gas-particle Hydrodynamics in CFB

Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach

Computational fluid study of radial and axial segregation characteristics in a dual fluidized bed reactor system

Numerical Simulation of Hydrodynamic Behaviors of Internal Circulation Bio-Fluidized Bed Reactor