Abstract:This work is devoted to the development and validation of a new 3D DEM-based (Euler-Lagrange) model for the steam reforming of methane in a tube filled with spherical catalyst particles (Ni/<math>α</math>-Al2O). The new model includes five gaseous chemical species (CH4, CO2, CO, H2O, H2). The model uses reaction rate expressions taken from the literature (Langmuir-Hinshelwood-Hougen-Watson (LHHW) kinetics). The main novelty of the model is its ability to account for the intraparticle heat and mass transfer for each individual particle coupled with the heat and mass transfer between the particles and the bulk flow. The model is validated against results from a comprehensive particle-resolved 3D-CFD-based model published in the literature. This 3D benchmark case corresponds to a 0.7 m length of packed tube, that consists of 807 spherical catalyst particles at a tube-to-particle diameter ratio of <math>N=5.96</math>. The comparison between our DEM-based model and 3D benchmark results demonstrates a good agreement comprising of 4 K (1%) difference in the temperature of outflow gas phase and up to 3% differences in the composition of outflow gas. Additionally, this new model is compared with a partial equilibrium model, which uses chemical equilibrium inside the catalyst particles and mass transfer rates between the particle surface and gas flow to calculate the reaction rate expressions. The performances of these new models are illustrated using additional simulations for the same packed bed taking into account thermal radiation. Finally, we validate our model against 2D simulations of an industrial scale reformer-tube published in the literature. Good agreements were demonstrated.

Modeling and Simulation of Commercial Catalytic Reformers

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

A dynamic model for naphtha catalytic reformers

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Development and Application of Industrial Catalytic Cracking Process Online Calculation

Simulation of catalytic reforming process based on HYSYS and its application

Eight Lumps Kinetic Model for Residual Oil Catalytic Cracking

Reactor Model of Counter-Current Continuous Catalyst-Regenerative Reforming Process toward Real Time Optimization

Dynamic modelling and simulation for catalytic reforming unit

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Process Optimization of Catalytic Reforming Based on Differential Evolution and HYSYS Mechanism Model

Optimization of the Countercurrent Continuous Reforming Process Based on Equation-Oriented Modeling and the SQP Algorithm

The Real-Time Dynamic Modeling and Simulation of Reforming Moving-Bed Reactor

Modeling and optimization for the continuous catalytic reforming process based on the hybrid surrogate optimization model

DEM-based model for steam methane reforming

The Coupling Performance During Reactive Sorption Enhanced Reforming (reser) Process: Simulation and Experimental Studies

Hybrid Modeling of Integrated Microchannel Methane Reformer for Miniaturized GTL Application Using an Effectiveness Factor Submodel Based on Complex Surface Chemistry