Abstract:Catalytic reforming is a key technology in the petroleum refining and petrochemical industry. In recent years, countercurrent continuous reforming has put forward and practiced the new concept of matching the activity of the catalyst with the difficulty of the reaction. Based on the equation-oriented method, the steady-state model for the reactor-regenerator section of countercurrent continuous reforming was established, including the reactor module, the regenerator module, the compressor model, the heat exchanger model, the heating furnace model, and the oil property model. The inlet and outlet of each module are connected according to the actual technological process, and the model conforms to the requirement of real-time optimization (RTO). The sequential quadratic programming (SQP) algorithm is used for calculation in this study. The model is calibrated to make the calculated value more consistent with the actual value. The model simulation showed the trend of the reforming reaction and the difference between countercurrent reforming and cocurrent reforming. Finally, the process model was optimized for different goals such as the yield of aromatics, the yield of high-octane gasoline, and the yield of C<sub>7</sub> <sup>+</sup> aromatics. These results indicate that the established model can simulate the actual industrial process, which can meet the requirements of RTO, and obtain considerable profits for different optimization objectives.

Process Optimization of Catalytic Reforming Based on Differential Evolution and HYSYS Mechanism Model

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Modeling and Simulation of Commercial Catalytic Reformers

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Multiobjective Optimization of the Industrial Naphtha Catalytic Reforming Process

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Development and Application of Industrial Catalytic Cracking Process Online Calculation

A dynamic model for naphtha catalytic reformers

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Simulation of catalytic reforming process based on HYSYS and its application

Modeling and optimization for the continuous catalytic reforming process based on the hybrid surrogate optimization model

Optimization of Catalytic Naphtha Reforming Process Based on Modified Differential Evolution Algorithm

Reactor Model of Counter-Current Continuous Catalyst-Regenerative Reforming Process toward Real Time Optimization

Molecular Modeling and Optimization for Catalytic Reforming

Integrated Dual-Production Mode Modeling and Multiobjective Optimization of an Industrial Continuous Catalytic Naphtha Reforming Process

First Principle Modeling and Optimization for Dehydrogenation of Ethylbenzene to Styrene

Optimization of the Countercurrent Continuous Reforming Process Based on Equation-Oriented Modeling and the SQP Algorithm

Modeling and Optimization of an Industrial Hydrocracking Unit to Improve the Yield of Diesel or Kerosene