Abstract:Nearly a century ago, Fischer and Tropsch discovered a means of synthesizing organic compounds ranging from C1 to C70 by reacting carbon monoxide and hydrogen on a catalyst. Fischer–Tropsch synthesis (FTS) is now known as a pseudo-polymerization process taking a mixture of CO as H2 (also known as syngas) to produce a vast array of hydrocarbons, along with various small amounts of oxygenated materials. Despite the decades spent studying this process, it is still considered a black-box reaction with a mechanism that is still under debate. This investigation sought to improve our understanding by taking data from a series of experimental Fischer–Tropsch synthesis runs to build a computational model. The experimental runs were completed in an isothermal continuous stirred-tank reactor, allowing for comparison across a series of completed catalyst tests. Similar catalytic recipes were chosen so that conditional comparisons of pressure, temperature, SV, and CO/H2 could be made. Further, results from the output of the reactor that included the deviations in product selectivity, especially that of methane and CO2, were considered. Cobalt was chosen for these exams for its industrial relevance and respectfully clean process as it does not intrinsically undergo the water–gas shift (WGS). The primary focus of this manuscript was to compare runs using cobalt-based catalysts that varied in two oxide catalyst supports. The results were obtained by creating two differential equations, one for H2 and one for CO, in terms of products or groups of products. These were analyzed using sensitivity analysis (SA) to determine the products or groups that impact the model the most. The results revealed a significant difference in sensitivity between the two catalyst–support combinations. When the model equations for H2 and CO were split, the results indicated that the CO equation was significantly more sensitive to CO2 production than the H2 equation.

Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Effect of reduction and reaction conditions on the catalytic performance of Co–Ni/Al2O3 catalyst in CO hydrogenation: modeling of surface reaction rate

Kinetics Modeling and Operating Conditions Optimization of Fischer-Tropsch Synthesis over Fe-based Catalysts

Experimental and kinetic modeling of Fischer–Tropsch synthesis over nano structure catalyst of Co–Ru/carbon nanotube

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Optimization of operating conditions of the Fischer–Tropsch synthesis based on multi-objective differential evolution algorithm

Determination of models and optimization for the products of Fischer-Teropsch synthesis on Fe-Mn/K Catalyst

Effects of Catalyst Activity, Particle Size and Shape, and Process Conditions on Catalyst Effectiveness and Methane Selectivity for Fischer–Tropsch Reaction: A Modeling Study

Maximizing Liquid Fuel Production from Reformed Biogas by Kinetic Studies and Optimization of Fischer–Tropsch Reactions

Fischer-Tropsch Synthesis on Fe-Co-Pt/γ-Al2O3 catalyst: A mass transfer, kinetic and mechanistic study

Kinetic study of Fe & Co perovskite catalyst in Fischer–Tropsch synthesis

LHHW/RSM reaction rate modeling for Co-Mn/SiO2 nanocatalyst in Fishcher-Tropsch synthesis

Fischer–Tropsch Synthesis: Computational Sensitivity Modeling for Series of Cobalt Catalysts

Studies and Discriminations of the Kinetic Models for the Iron-Based Fischer−Tropsch Catalytic Reaction in a Recycle Slurry Reactor

An investigation of the catalytic performance of Fe–Mn/Al2O3 nanocatalyst for light olefins production using RSM method and kinetic study

Operando magnetic resonance imaging of product distributions within the pores of catalyst pellets during Fischer–Tropsch synthesis

Design and Technoeconomic Analysis of Fischer–Tropsch Fixed‐Bed Synthesis with Cobalt‐Based Catalysts

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Kinetic estimation of Fischer–Tropsch synthesis using biogas-derived feedstocks over Ni/Al2O3 catalyst

Modeling, optimization and operability analysis of Lurgi and Haldor Topsøe methanol synthesis reactors