LHHW/RSM reaction rate modeling for Co-Mn/SiO2 nanocatalyst in Fishcher-Tropsch synthesis

Hamid Reza Azizi,Mohsen Mansouri,Farshad Farshchi Tabrizi,Ghobad Mansouri,Naimeh Setareshenas

DOI: https://doi.org/10.1038/s41598-024-64382-0

IF: 4.6

2024-06-13

Scientific Reports

Abstract:This study aims to assess the kinetics of Fischer–Tropsch (FT) reaction over the cobalt-manganese nanoparticles supported by silica oxide. Nanoparticles were synthesized by the thermal decomposition method using "[Co(NH 3 ) 4 CO 3 ]MnO 4 " complex and characterized by XRD, TEM, and BET techniques. The kinetics of the process were evaluated using a combination of Langmuir–Hinshelwood-Hougen-Watson (LHHW) and response surface methodology. Correlation factors of 0.9902 and 0.962 were obtained for the response surface method (RSM) and LHHW, respectively. The two methods were in good agreement, and the results showed that the rate-determining step was the reaction of the adsorbed methylene with the adsorbed hydrogen atom, and only carbon monoxide molecules were the most active species on the catalyst surface. A temperature of 502.53 K and a CO partial pressure of 2.76 bar are proposed as the optimal conditions by RSM analysis. The activation energy of CO consumption reaction was estimated to be 61.06 kJ/mol.

multidisciplinary sciences

What problem does this paper attempt to address?

The paper aims to address the kinetic issues of cobalt-manganese nanocatalysts (Co-Mn/SiO2) in the Fischer–Tropsch synthesis (FTS) process. Specifically, the research objectives include: 1. **Evaluating Catalyst Kinetics**: Assessing the kinetic behavior of cobalt-manganese nanocatalysts in the Fischer–Tropsch synthesis reaction using two methods: Langmuir–Hinshelwood–Hougen–Watson (LHHW) and Response Surface Methodology (RSM). 2. **Optimizing Reaction Conditions**: Determining the optimal reaction conditions, including temperature, hydrogen partial pressure, and carbon monoxide partial pressure, to improve the efficiency and selectivity of the Fischer–Tropsch synthesis. 3. **Characterizing Catalysts**: Characterizing the catalysts using techniques such as X-ray diffraction (XRD), transmission electron microscopy (TEM), and BET to understand their physicochemical properties. 4. **Modeling and Validation**: Developing mathematical models to describe the kinetics of the Fischer–Tropsch synthesis reaction and validating these models with experimental data. Through these studies, the paper aims to better understand the mechanism of cobalt-manganese nanocatalysts in Fischer–Tropsch synthesis and provide theoretical support for their industrial application.

LHHW/RSM reaction rate modeling for Co-Mn/SiO2 nanocatalyst in Fishcher-Tropsch synthesis

Experimental and kinetic modeling of Fischer–Tropsch synthesis over nano structure catalyst of Co–Ru/carbon nanotube

An investigation of the catalytic performance of Fe–Mn/Al2O3 nanocatalyst for light olefins production using RSM method and kinetic study

Effect of reduction and reaction conditions on the catalytic performance of Co–Ni/Al2O3 catalyst in CO hydrogenation: modeling of surface reaction rate

The role of Manganese in CoMnOx Catalysts for Selective Fischer-Tropsch Synthesis

Dynamics of Co/Co2C redox cycle and their catalytic consequences in Fischer–Tropsch synthesis on cobalt–manganese catalysts

Impact of Inverse Manganese Promotion on Silica-Supported Cobalt Catalysts for Long-Chain Hydrocarbons via Fischer–Tropsch Synthesis

MOFs-assisted synthesis of robust and efficient cobalt-based Fischer–Tropsch catalysts

Cobalt-Based Fischer–Tropsch Synthesis: A Kinetic Evaluation of Metal–Support Interactions Using an Inverse Model System

Fischer–Tropsch Synthesis: Computational Sensitivity Modeling for Series of Cobalt Catalysts

Fischer-Tropsch Synthesis on Co/SBA-15 Catalyst: Characterization and Oligomerization Modeling

Insight into the Rate-Determining Step and Active Sites in the Fischer–Tropsch Reaction over Cobalt Catalysts

Computational investigation of the kinetics and mechanism of the initial steps of the Fischer-Tropsch synthesis on cobalt.

Co-Based Catalysts Supported on Silica and Carbon Materials: Effect of Support Property on Cobalt Species and Fischer–Tropsch Synthesis Performance

Fischer-Tropsch Synthesis: The Characterization and Testing of Pt-Co/SiO2 Catalysts Prepared with Alternative Cobalt Precursors

Studies and Discriminations of the Kinetic Models for the Iron-Based Fischer−Tropsch Catalytic Reaction in a Recycle Slurry Reactor

Effect of Resorcinol Formaldehyde Resin Gel on the Preparation of Co/Sio2 Catalysts for Fischer-Tropsch Synthesis

Effect of Pressure, H2/CO Ratio and Reduction Conditions on Co-Mn/CNT Bimetallic Catalyst Performance in Fischer-Tropsch Reaction

Fischer-Tropsch Synthesis on Fe-Co-Pt/γ-Al2O3 catalyst: A mass transfer, kinetic and mechanistic study

Kinetic study of Fe & Co perovskite catalyst in Fischer–Tropsch synthesis

Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor