Kinetic study of Fe & Co perovskite catalyst in Fischer–Tropsch synthesis

Behnoosh Moshtari,Seyed Hasan Hashemabadi,Yahya Zamani

DOI: https://doi.org/10.1038/s41598-024-59561-y

IF: 4.6

2024-04-23

Scientific Reports

Abstract:The investigation of the reaction's kinetics is one of the most crucial aspects of the design of a commercial process. The current research investigates the kinetics of Fischer–Tropsch synthesis using a perovskite catalyst. The LaFe 0.7 Co 0.3 O 3 perovskite catalyst was prepared via the thermal sol–gel technique and characterized using BET, XRD, SEM, and H 2 -TPR techniques. According to operating conditions (e.g. H 2 /CO: 1–2, pressure: 10–20 barg, temperature: 240–300 °C, and GHSV: 3000 1/h), Fischer–Tropsch reaction kinetics (CO conversion) were carried out in a fixed-bed reactor. Using the framework of Langmuir–Hinshelwood–Hougen–Watson (LHHW) theories, 18 kinetic expressions for CO conversion were derived, and all were fitted to experimental data one by one to determine the optimum condition. The correlation was derived from experimental data and well-fitted using LHHW form (according to the enol mechanism, carbon monoxide and dissociated hydrogen atoms are adsorbed and reacted on the surface of the catalyst) −r CO = k p b CO P CO (b H2 P H2 ) 0.5 /(1 + b CO P CO + (b H2 P H2 ) 0.5 ) 2 . Finally, the activation energy of the optimum kinetic model was determined with respect to the Arrhenius equation under various operating conditions. The activation energy of perovskite catalyst is about 106.25 kJ/mol at temperatures 240–300 °C, pressures 10–20 barg, and H 2 /CO ratios 1–2, which is lower than other types of catalyst. Therefore, the catalyst was activated at a high temperature and demonstrated stable performance without any temperature runaway and coking issues.

multidisciplinary sciences

What problem does this paper attempt to address?

The main purpose of this paper is to study the kinetic behavior of the iron-cobalt perovskite catalyst (LaFe0.7Co0.3O3) in the Fischer-Tropsch synthesis process. Specifically, the paper conducted experiments using a fixed-bed reactor under different operating conditions (such as a hydrogen to carbon monoxide ratio of 1-2, pressure of 10-20 bar, and temperature of 240-300 degrees Celsius). The researchers derived 18 kinetic expressions for carbon monoxide conversion using the Langmuir-Hinshelwood-Hougen-Watson (LHHW) theoretical framework and fitted these models to the experimental data one by one to determine the optimal conditions.

Ultimately, they found that the optimal kinetic model corresponds to the enol mechanism, where carbon monoxide and hydrogen atoms adsorb on the catalyst surface and react. Additionally, the paper determined that the optimal activation energy for this perovskite catalyst is 106.25 kJ/mol, which is lower than that of other types of catalysts. Therefore, this catalyst activates at high temperatures and exhibits stable performance during operation, without issues of temperature runaway and coke formation. Overall, this study aims to develop a kinetic model for a perovskite catalyst suitable for the Fischer-Tropsch synthesis process.