Abstract:Nearly a century ago, Fischer and Tropsch discovered a means of synthesizing organic compounds ranging from C1 to C70 by reacting carbon monoxide and hydrogen on a catalyst. Fischer–Tropsch synthesis (FTS) is now known as a pseudo-polymerization process taking a mixture of CO as H2 (also known as syngas) to produce a vast array of hydrocarbons, along with various small amounts of oxygenated materials. Despite the decades spent studying this process, it is still considered a black-box reaction with a mechanism that is still under debate. This investigation sought to improve our understanding by taking data from a series of experimental Fischer–Tropsch synthesis runs to build a computational model. The experimental runs were completed in an isothermal continuous stirred-tank reactor, allowing for comparison across a series of completed catalyst tests. Similar catalytic recipes were chosen so that conditional comparisons of pressure, temperature, SV, and CO/H2 could be made. Further, results from the output of the reactor that included the deviations in product selectivity, especially that of methane and CO2, were considered. Cobalt was chosen for these exams for its industrial relevance and respectfully clean process as it does not intrinsically undergo the water–gas shift (WGS). The primary focus of this manuscript was to compare runs using cobalt-based catalysts that varied in two oxide catalyst supports. The results were obtained by creating two differential equations, one for H2 and one for CO, in terms of products or groups of products. These were analyzed using sensitivity analysis (SA) to determine the products or groups that impact the model the most. The results revealed a significant difference in sensitivity between the two catalyst–support combinations. When the model equations for H2 and CO were split, the results indicated that the CO equation was significantly more sensitive to CO2 production than the H2 equation.

Kinetics Modeling and Operating Conditions Optimization of Fischer-Tropsch Synthesis over Fe-based Catalysts

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Experimental and kinetic modeling of Fischer–Tropsch synthesis over nano structure catalyst of Co–Ru/carbon nanotube

Kinetic Study of Product Distribution Using Various Data-Driven and Statistical Models for Fischer–Tropsch Synthesis

Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor

Studies and Discriminations of the Kinetic Models for the Iron-Based Fischer−Tropsch Catalytic Reaction in a Recycle Slurry Reactor

Fischer–Tropsch Synthesis: Computational Sensitivity Modeling for Series of Cobalt Catalysts

Parametric analysis of CO2 hydrogenation via Fischer-Tropsch synthesis: A review based on machine learning for quantitative assessment

Liquid fuel production from syngas: Simulation and optimization using artificial neural network

Computational investigation of the kinetics and mechanism of the initial steps of the Fischer-Tropsch synthesis on cobalt.

Kinetic estimation of Fischer–Tropsch synthesis using biogas-derived feedstocks over Ni/Al2O3 catalyst

Maximizing Liquid Fuel Production from Reformed Biogas by Kinetic Studies and Optimization of Fischer–Tropsch Reactions

The design principle of iron-based catalysts for fischer-tropsch synthesis: from theory to practice

Recent Mechanistic Understanding of Fischer-Tropsch Synthesis on Fe-Carbide

Fischer–Tropsch Synthesis Model Involving the Living Growth of Carbon Chains

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Optimization of operating conditions of the Fischer–Tropsch synthesis based on multi-objective differential evolution algorithm

Application of nonlinear partial least square in catalyst modeling

Reactor Model of Counter-Current Continuous Catalyst-Regenerative Reforming Process toward Real Time Optimization

Multi-scale simulation of the strongly exothermic process of Fischer–Tropsch synthesis to lower olefins