Abstract:Fluidization of gas-solid system is long-standing subject of basic research. As a result of fluid-particle intensive contact, an isothermal system with superior heat and mass transfer abilities favors its use for chemical reactions, mixing, drying, and other applications. Inspire of huge benefits, number of problems are still associated with gas-solid fluidization system. Solid properties, in particular, particle size and size distribution significantly affect the interaction/contacting between particles, their movement and the fluid-particle mixing. Distinct macroscopic phenomena of plug formation, channeling and particle agglomeration was observed with increasing superficial gas velocity in conventional fluidized bed of fine/nano-particles (group C in the Geldart classification) due to strong interparticle forces. The concept of powder–particle fluidized bed (PPFB) was first introduced by Kato et al. in early 1990s [1]. It is known to be a useful technique to fluidize group C particles without external aid like acoustic, centrifugal, magnetic, stirring and/or vibrating fields, etc. In the PPFB process, fine powders (group C) are fluidized with coarse particles (group B). The bimodal fluidized bed system at steady state gives a certain stable hold-up of fine powders in the bed [2]. Many investigators, Sun and Grace [3], and Xue et al. [4] studied bi-modal fluidization in bubbling or turbulent regimes, while, Wei et al. [5] and Du [6, 7] concentrate on CFBs. The investigation of Xue et al. showed that by adding coarse particles fluidization quality of fine particles could improve [4]. Extensive studies of Wei et al. indicated that the addition of coarse particles to a fluid catalytic cracking (FCC) riser decreased the lateral solids mixing and had insignificant influence on axial solids mixing [5]. Du et al. studied the axial and lateral mixing by using tracer particles of different sizes in a FCC riser and found that the axial solids back mixing increased, while radial solids mixing decreased with the increase of particle size and density. Recently, Zeeshan et al. explained bi-modal/bi-particle fluidized bed system hydrodynamics, attrition, mixing behaviour, and its applications [8]. Stable and uniform heat transfer in Fluidized Bed Reactors (FBR) without providing provisions of external or internal source is a difficult task for designers. As continuous heat supply and deduction is a necessary part of FBR operation for controlling highly endothermic and exothermic reactions, respectively. The state-of-the-art idea of bi-modal particle (Gas-Solid-Solid) fluidization is given by FLOTU, in order to overcome above said reaction barriers in a fluidized bed technology. In this chapter, a comprehensive overview of

Experimental modeling to design a heat exchanger control strategy for a Fischer–Tropsch fluidized bed

Heat Transfer Characteristics Analysis and Optimization of the Micro Packed Bed Bionic Reactor

CFD simulation of cross flow in multi-tubular fixed-bed reactor of industrial level

Realization and Control of Multiple Temperature Zones in Liquid‐containing Gas–solid Fluidized Bed Reactor

On the Use of Steady-State Optimal Initial Operating Conditions for Control Scheme Implementation of a Fixed-Bed Fischer–Tropsch Reactor

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

CFD Modelling of the Co-Gasification of Biomass and Coal Particles in Fluidised Beds

Heat transfer intensification in compact tubular reactors with cellular internals: A pilot-scale assessment of highly conductive packed-POCS with skin applied to the Fischer-Tropsch synthesis

Simulation and Analysis of a Tubular Fixed‐Bed Fischer‐Tropsch Synthesis Reactor with Co‐Based Catalyst

Modelling and Design of a Novel Integrated Heat Exchange Reactor for Oxy-Fuel Combustion Flue Gas Deoxygenation

Heat transfer analysis of a tube-in-tube steam reformer for the application of MGT-SOFC hybrid process

Two-Dimensional Computational Fluid Dynamics Simulation of Heat Removal in Fluidized Bed Methanation Reactors from Coke Oven Gas Using Immersed Horizontal Tubes

Mathematic Simulation of a Tube-Shell Type Fixed-Bed Reactor for Fischer-Tropsch Synthesis

Temperature control strategy for safer and heat-efficient operations in a catalytic flow reactor

Control System for an Oxy-Fuel Combustion Fluidized Bed with Flue Gas Recirculation

Design and Technoeconomic Analysis of Fischer–Tropsch Fixed‐Bed Synthesis with Cobalt‐Based Catalysts

Two-dimensional mathematical model of fixed-bed Fisher-Tropsch synthesis reactor

Multi-scale simulation of the strongly exothermic process of Fischer–Tropsch synthesis to lower olefins

Development of a neural network model predictive controller for the fluidized bed biomass gasification process

Effect of the Operation Parameters on the Fischer–Tropsch Synthesis in Fluidized Bed Reactors

Integrated Approach For Heat Transfer In Fluidized Bed Reactors