Abstract:Distillation units require huge amounts of energy for the separation of the multicomponent mixtures involved in refineries and petrochemical industries. Keeping the same separation standards, energy savings can be achieved in multiple ways. The overall efficiency of the distillation column system is determined from the trade-offs of the Operating Expenditures (OPEX) and Capital investment cost (CAPEX), as there is a strong interaction between the distillation columns and the Heat Exchanger Network (HEN) of the interconnecting streams. Therefore, the highly complex optimization of this trade-off necessitates moving towards process integration solutions. Individually, both distillation columns and HEN are well-defined rigorous problems and numerous methodologies have been developed for finding optimal solutions. The integrative problem however is larger in scale, computational demanding and less robust. In this paper, a systematic optimization methodology for process integration of a multicomponent distillation column complex is presented. The highly nonlinear and time consuming rigorous models of the distillation column are being substituted with simple surrogate models that generate operating responses with adequate accuracy. Moreover, another surrogate model is included in the Mixed Integer Non-Linear Programming (MINLP) formulation to enhance the accuracy of the results by considering the phase changes of the process streams involved in the HEN. The methodology is applied on two case studies of the aromatics separation PARAMAX complex and the results illustrate significant reductions on the Total Annualized Cost. With a scope limited to the benzene and toluene columns, the gain reaches about 15%.

On the Use of Steady-State Optimal Initial Operating Conditions for Control Scheme Implementation of a Fixed-Bed Fischer–Tropsch Reactor

Implementation Of Advanced Control For A Heat-Integrated Distillation Column System

Experimental modeling to design a heat exchanger control strategy for a Fischer–Tropsch fluidized bed

Economic Operation of a Fluid Catalytic Cracking Process Using Self-Optimizing Control and Reconfiguration

Optimization of operating conditions of the Fischer–Tropsch synthesis based on multi-objective differential evolution algorithm

Simulation and Analysis of a Tubular Fixed‐Bed Fischer‐Tropsch Synthesis Reactor with Co‐Based Catalyst

Experimental and simulation study of the temperature distribution in a bench‐scale fixed bed Fischer–Tropsch reactor

Modeling and operating conditions optimization of Fischer–Tropsch synthesis in a fixed-bed reactor

Dynamic Optimization of Multivariable Endothermic Reaction in Cascade CSTR

Effect of the Operation Parameters on the Fischer–Tropsch Synthesis in Fluidized Bed Reactors

Kinetics Modeling and Operating Conditions Optimization of Fischer-Tropsch Synthesis over Fe-based Catalysts

Maximizing Liquid Fuel Production from Reformed Biogas by Kinetic Studies and Optimization of Fischer–Tropsch Reactions

Design and Technoeconomic Analysis of Fischer–Tropsch Fixed‐Bed Synthesis with Cobalt‐Based Catalysts

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

An Explicit Optimizing Control Approach Based on Output Feedback

Control System for an Oxy-Fuel Combustion Fluidized Bed with Flue Gas Recirculation

Optimization of Fischer–Tropsch microchannel reactor using computational fluid dynamics and enveloped Bayesian optimization

Mathematic Simulation of a Tube-Shell Type Fixed-Bed Reactor for Fischer-Tropsch Synthesis

Optimization of Catalyst Service Cycle and Start-Up Considering the Reactor-Distillation-hen Integration and Climate

Two-dimensional mathematical model of fixed-bed Fisher-Tropsch synthesis reactor

Dynamic Modeling and Analysis of Process Constraints for Improvement for an Industrial Unipol® Polypropylene Fluidized Bed Reactor