Modelling and Design of a Novel Integrated Heat Exchange Reactor for Oxy-Fuel Combustion Flue Gas Deoxygenation

Hongtian Ge,Andrew J. Furlong,Scott Champagne,Robin W. Hughes,Jan B. Haelssig,Arturo Macchi

DOI: https://doi.org/10.3390/en17061474

IF: 3.2

2024-03-20

Energies

Abstract:The concentration of residual O2 in oxy-fuel combustion flue gas needs to be reduced before CO2 transportation, utilization, or storage. An original application of the printed circuit heat exchanger (PCHE) for catalytic combustion with natural gas (catalytic deoxygenation) is described for reducing the residual O2 concentration. The PCHE design features multiple adiabatic packed beds with interstage cooling and fuel injection, allowing precise control over the reaction extent and temperature within each reaction stage through the manipulation of fuel and utility flow rates. This work describes the design of a PCHE for methane–oxygen catalytic combustion where the catalyst loading is minimized while reducing the O2 concentration from 3 vol% to 100 ppmv, considering a maximum adiabatic temperature rise of 50 °C per stage. Each PCHE design differs by the number of reaction stages and its individual bed lengths. As part of the design process, a one-dimensional transient reduced-order reactor model (1D ROM) was developed and compared to temperature and species concentration axial profiles from 3D CFD simulations. The final design consists of five reaction stages and four heat exchanger sections, providing a PCHE length of 1.09 m at a processing rate of 12.3 kg/s flue gas per m3 PCHE.

energy & fuels

What problem does this paper attempt to address?

The paper aims to address the issue of residual oxygen (O₂) in flue gas generated during oxy-fuel combustion. Specifically, the goal of the paper is to reduce the O₂ concentration in the flue gas from 3% to ≤100 ppmv before pipeline transportation, utilization, or storage. To achieve this goal, the researchers designed a novel integrated heat exchange reactor (Printed Circuit Heat Exchanger, PCHE) for catalytic deoxygenation.

The main research contents include:
1. **Designing the PCHE**: Design a novel PCHE that achieves efficient deoxygenation through a combination of multi-stage adiabatic packed bed reactors and intermediate cooling.
2. **Modeling and Simulation**: Develop a one-dimensional transient reduced-order reactor model (1D ROM) and compare it with three-dimensional computational fluid dynamics simulations to ensure model consistency.
3. **Optimizing Performance**: Optimize the design of the PCHE by adjusting the number of reaction stages and the length of the packed bed in each stage to achieve optimal temperature control and oxygen removal efficiency.

Overall, this study aims to improve flue gas treatment efficiency through advanced heat exchange technology and catalytic reaction processes, thereby meeting stringent O₂ concentration requirements.