Experimental investigation of mass transfer efficiency in reactive Taylor flow for CO 2 absorption
Emilien Bourdon,Anne-Marie Billet,David Rouzineau,Céline Volpi,Renaud Cadours,Carine Julcour
DOI: https://doi.org/10.1016/j.ces.2024.120108
IF: 4.7
2024-04-11
Chemical Engineering Science
Abstract:In the context of global efforts to reduce carbon dioxide emissions, the periodic flow pattern and high mass transfer efficiency encountered in Taylor flow are considered in this work for the evaluation of new solvents for CO2 reactive absorption For this purpose, local values of the liquid-side mass transfer coefficient kL are provided for the CO2-NaOH-H2O system (liquid phase concentration: 0.25, 0.5, 0.7 or 1 M), in Taylor flow in a milli-channel. The experimental strategy is based on the shadowgraphy technique: the dynamic shrinkage of Taylor bubbles during CO2 uptake along the channel is recorded. The local mass transfer rate is deduced and compared to the overall rate estimated from the analysis of inlet and outlet liquid phase samples. In addition, the experimental results are compared with those obtained from the direct simulation of the reactive absorption, following the "unit cell approach". The computed distribution of reactant concentrations in the liquid phase clarifies the underlying local phenomena. The evaluation of the enhancement factor, which takes into account the changes in liquid phase composition along the channel, allows the estimation of the coefficient kL . For the present experimental campaign, the average enhancement factor (averaged over the channel length) is found to range between 2 and 15. This attests a fast chemical reaction – with regard to mass transfer – in the chosen conditions. Values of kL vary between 1.9·10 −5 and 2.8·10 −4 m.s −1 over the range of bubble velocity measured in the Region of Interrogation (0.05–0.4 m.s −1 ). The kL results obtained for the whole experimental campaign are then analyzed with respect to correlations issued from selected works of the literature and fitted according to relevant parameters. Thus, a novel scaling law is proposed to estimate the Sherwood number in reactive Taylor flow.
engineering, chemical