Abstract:This communication presents a methodology, based on a modified drift flux model, to determine bubble size distribution in column flotation. The modified drift flux model incorporates a surfactant-type parameter. This parameter considers the impact of surfactant on bubble hydrodynamics. The methodology aims to improve the accuracy of bubble size distribution prediction, which presents deviation depending on surfactant type (i.e. polyglycolic based or alcoholic base). Many authors have proposed different mathematical improvements to reduce de experimental data deviations in the presence of different surfactants. However, from 1988 to 2022, the determination coefficient, or the quality of the adjustments, from the proposed mathematical models is, at the most, 92% (relative error). The proposed methodology improves the quality of the adjustments to 98.6, adding a single parameter for groups of surfactants. This methodology incorporates a single parameter in the terminal velocity calculation that can compensate for the impact of surfactant type in bubble hydrodynamic (bubble skin friction or drag coefficient, bubble wake, bubble shape, bubble rigidity). This parameter is a function of the gas holdup calculated from gas velocity measured and the bubble size distribution calculated (deviated) from gas holdup and gas velocity measured. The methodology is validated with reported experimental results and proposed modifications from various authors. The confidence interval (2 σ) is reduced from 0.11mm to 0.05mm in the case of (Yianatos, Banisi, Ostadrahimi). In the case of the recently reported experimental results from Maldonado and Gomez, the confidence interval is reduced from 0.31 mm to 0.09 mm. These results improve bubble size estimation based on drift flux in column flotation, contributing to a better understanding of surfactant impact on bubble swarm hydrodynamics.

Numerical and experimental analysis of oxygen transfer in bubble columns: Assessment of predicting the oxygen-transfer rate in clean water and with surfactant solutions

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Modeling of Mass Transfer Characteristics of Bubble Column Reactor with Surfactant Present

A Mathematical Model for Single CO2 Bubble Motion with Mass Transfer and Surfactant Adsorption/desorption in Stagnant Surfactant Solutions

New insights into the effect of surfactants on oxygen mass transfer in activated sludge process

Oxygen Transfer Rate in a Coarse-Bubble Diffused Aeration System

Evaluating Oxygen Mass Transfer Parameters for Large-Scale Engineering Application of Membrane Bioreactors

Experimental and numerical investigation of reactive species transport around a small rising bubble

Applicability of a modified breakage and coalescence model based on the complete turbulence spectrum concept for CFD simulation of gas-liquid mass transfer in a stirred tank reactor

Mathematical Models for Macro-Scale Mass Transfer in Airlift Loop Reactors

CFD simulation for comparative of hydrodynamic effects in biochemical reactors using population balance model with varied inlet gas distribution profiles

Experimental study and CFD simulation of mass transfercharacteristics of a gas-induced pulsating flow bubblecolumn

Theoretical Analysis and Experimental Verification of Ozone Mass Transfer in Bubble Columns

Numerical modelling of surface aeration and N2O emission in biological water resource recovery

Evaluating Dissolved Ozone in a Bubble Column Using a Discrete-Bubble Model

Effects of Surfactants on Oxygen Transfer in Microbubble Aeration

CFD as a Tool to Optimize Aeration Tank Design and Operation

Application of a simplified model for assessing particle removal in dissolved air flotation (DAF) systems: Experimental verification at laboratory and full-scale level

Numerical Simulation of Bubble-Liquid Two-Phase Turbulent Flows in Shallow Bioreactor

Enhancing bubble bize prediction in flotation processes: a drift flux model accounting for frother type