Abstract:The effect of total flow rate on membrane dispersion extraction efficiency was studied for liquid-liquid micromixing systems.Mass transfer coefficient and mass transfer rate were obtained from the experimental results for the micromixing process. In order to predict mass transfer performance of the micromixing process, some traditional mathematical models were tested.Total and individual mass transfer coefficients were calculated, and compared with the experimental results. The results showed that main factors affecting mass transfer coefficients were residence time and droplets size, and mass transfer coefficients increased with the reduction of residence time.Mass transfer coefficients in the micromixing process could reach as much as 1.2×10 -4 m·s -1,which was about 10—100 times higher than that in a traditional column extraction process. The mass transfer performance in the micromixing process could be predicted neither with the model in which mass transfer resistance of any one phase was ignored, nor with the simplified average equations.So mass transfer performance in the micromixing process was much different from the traditional column extraction process.The authors’results showed that mass transfer coefficients could be predicted with the full traditional two-phase resistance model by considering both steady and non-steady states, and the calculated values were in good agreement with the experimental values.

Mathematical Models for Macro-Scale Mass Transfer in Airlift Loop Reactors

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Analysis and Measurement of Mass Transfer in Airlift Loop Reactors

Modeling of Mass Transfer in an Internal Loop Airlift Reactor

Mathematical modeling of the residence time distribution in loop reactors

A Study on Flow and Heat Transfer Characteristics for Saturated Falling-Film Evaporation of Liquid Oxygen in a Vertical Channel

Local Liquid Side Mass Transfer Model in Gas-Liquid-Solid Three-Phase Flow Airlift Loop Reactor for Newtonian and Non-Newtonian Fluids

LOCAL LIQUID SIDE MASS TRANSFER MODEL IN AIRLIFT LOOP REACTOR AND SELF-ASPIRATED REVERSED FLOW JET LOOP REACTOR

Research on Mass Transfer Coefficient Measurement Model of External-Loop Airlift Reactor

The Study of Fluid Dynamics Simulation of the Internal Flow Field in a Novel Airlift Oscillation Loop Bioreactor

Volumetric Mass Transfer Coefficient of Oxygen in an Internal Loop Airlift Reactor with A Convergence-Divergence Draft Tube

Flow Behavior and Mass Transfer in Three-Phase External-Loop Airlift Reactors with Large Particles

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

Multiphase flow characteristics of a novel internal-loop airlift reactor

Local gas-liquid mass transfer model in self-aspirated reversed flow jet loop reactor

Experimental study and modeling on liquid dispersion in external-loop airlift slurry reactors

Mass transfer model for liquid liquid micromixing systems

Study on three-phase Newtonian fluid in an internal loop airlift reactor with a convergence-divergence draft tube

A Mass Transfer Model Based on Individual Bubbles and an Unsteady State Film Mechanism

Hydrodynamics and mass transfer of concentric-tube internal loop airlift reactors: A review

Investigation of hydrodynamics and mass transfer in an internal loop airlift slurry reactor integrating mixing and separation