Abstract:A bi-dispersed bubble model incorporating lateral forces and bubble-induced turbulence is employed to simulate hydrodynamics in an up flow jet-loop reactor (JLR) operated in gas-liquid co-injection mode. In the model the bubble swarm effect on the drag force was differently described for the large and small bubble phases, where the drag force for the large bubble decreases with the gas holdup in accordance with the wake acceleration effect, while for the small bubble the drag force increases with the gas holdup in consideration of the hindrance effect of the bubble swarm. The simulated radial profiles of gas holdup and axial liquid velocity agree with the cold experiments, which shows that the different description of drag forces for the large and small bubbles is reasonable for correctly simulating the effect of superficial gas velocity on liquid circulation velocity. Effects of draft tube position (H-c) and cross-sectional area ratio of riser to downcomer (A(r)/A(d)) are evaluated by model simulation. The results show that with the increase of H-C and A(r)/A(d), both overall gas holdup and liquid circulation velocity reach a maximum at He = 0.06 m and A(r)/A(d) = 0.44, respectively. Recommendatory geometric parameters for the JLR design is: 0 < H-C <0.09 m, 0.4 < Ar/Ad < 0.7. (C) 2018 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

Local Liquid Side Mass Transfer Model in Gas-Liquid-Solid Three-Phase Flow Airlift Loop Reactor for Newtonian and Non-Newtonian Fluids

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

LOCAL LIQUID SIDE MASS TRANSFER MODEL IN AIRLIFT LOOP REACTOR AND SELF-ASPIRATED REVERSED FLOW JET LOOP REACTOR

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Local gas-liquid mass transfer model in self-aspirated reversed flow jet loop reactor

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

Mathematical Models for Macro-Scale Mass Transfer in Airlift Loop Reactors

Local hydrodynamics modeling of a gas-liquid-solid three-phase airlift loop reactor

Characteristics of three-phase internal loop airlift bioreactors with complete gas recirculation for non-Newtonian fluids

Local Overall Volumetric Gas-Liquid Mass Transfer Coefficients in Gas-Liquid-Solid Reversed Flow Jet Loop Bioreactor with A Non-Newtonian Fluid

LIQUID CIRCULATION RATE AND VOLUMETRIC MASS TRANSFER COEFFICIENT IN MULTI-TUBE AIRLIFT LOOP REACTOR

Flow behavior in the three-phase internal-loop airlift reactor with large gas recirculation through the downcomer

Two-Fluid Model Simulations of the National Energy Technology Laboratory Bubbling Fluidized Bed Challenge Problem

Local Overall Gas–liquid Mass Transfer Coefficient in a Gas–liquid–solid Reversed Flow Jet Loop Reactor

Analysis and Measurement of Mass Transfer in Airlift Loop Reactors

Appropriate Formulations for Velocity and Pressure Calculations at Gas-liquid Interface with Collocated Variable Arrangement

Flow Behavior and Mass Transfer in Three-Phase External-Loop Airlift Reactors with Large Particles

Hydrodynamics of Three-Phase Internal-Loop Airlift Reactor with Large Particles