Abstract:A bi-dispersed bubble model incorporating lateral forces and bubble-induced turbulence is employed to simulate hydrodynamics in an up flow jet-loop reactor (JLR) operated in gas-liquid co-injection mode. In the model the bubble swarm effect on the drag force was differently described for the large and small bubble phases, where the drag force for the large bubble decreases with the gas holdup in accordance with the wake acceleration effect, while for the small bubble the drag force increases with the gas holdup in consideration of the hindrance effect of the bubble swarm. The simulated radial profiles of gas holdup and axial liquid velocity agree with the cold experiments, which shows that the different description of drag forces for the large and small bubbles is reasonable for correctly simulating the effect of superficial gas velocity on liquid circulation velocity. Effects of draft tube position (H-c) and cross-sectional area ratio of riser to downcomer (A(r)/A(d)) are evaluated by model simulation. The results show that with the increase of H-C and A(r)/A(d), both overall gas holdup and liquid circulation velocity reach a maximum at He = 0.06 m and A(r)/A(d) = 0.44, respectively. Recommendatory geometric parameters for the JLR design is: 0 < H-C <0.09 m, 0.4 < Ar/Ad < 0.7. (C) 2018 Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

Local Overall Gas–liquid Mass Transfer Coefficient in a Gas–liquid–solid Reversed Flow Jet Loop Reactor

Gas Holdup and Liquid Velocity Distribution in a Jet Loop Reactor

Local Overall Volumetric Gas-Liquid Mass Transfer Coefficients in Gas-Liquid-Solid Reversed Flow Jet Loop Bioreactor with A Non-Newtonian Fluid

Gas Holdup and Liquid Velocity Distributions in the Up Flow Jet-Loop Reactor

Experimental Investigation on Multiscale Hydrodynamics in a Novel Gas–liquid–solid Three Phase Jet‐loop Reactor

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Local Gas Phase Flow Characteristics of a Gas-Liquid-Solid Three-Phase Reversed Flow Jet Loop Reactor

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

Local gas-liquid mass transfer model in self-aspirated reversed flow jet loop reactor

LOCAL LIQUID SIDE MASS TRANSFER MODEL IN AIRLIFT LOOP REACTOR AND SELF-ASPIRATED REVERSED FLOW JET LOOP REACTOR

Local Liquid Side Mass Transfer Model in Gas-Liquid-Solid Three-Phase Flow Airlift Loop Reactor for Newtonian and Non-Newtonian Fluids

Studies on Gas-Liquid Mass Transfer Characteristics of Horizontal Vessel

Effects of Internal Structures on Mass Transfer Performance of Jet Bubbling Reactor

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Gas–Liquid Flow Characteristics and Performance Optimization of Industrial Downflow Jet Loop Reactor Based on Computational Fluid Dynamics

Gas–liquid mass transfer behavior in three-phase CFB reactors

Experimental Study on Gas-Liquid Flow Characteristics of Submerged Air Jets

Gas-Liquid Interfacial Area and Mass Transfer Coefficient in a Three-phase Circulating Fluidized Bed

The study on mass transfer characteristics of the intensified gas-liquid jet stirred reactor