Abstract:Methane steam reforming (MSR) is studied experimentally and numerically. The intrinsic kinetics of the reaction are determined using a micro fluidized bed with a catalyst containing more than 50 wt % NiO/alpha-Al2O3. Intrinsic kinetic models are developed for parallel and serial reaction mechanisms, but the parallel mechanism is found to better match the experimental data. The activation energies for CO and CO2 formation are 81.69 kJ/mol and 59.38 kJ/mol, respectively, and the pre-exponential factors are 316.6 mol/(g h kPa(0.85)) and 0.00263 mol/(g h kPa(3.1)), respectively. As the reaction temperature increases, the rate of CO formation increases and that of CO2 decreases. At 800 degrees C, almost all the CH4 is converted to CO and H-2, and the methane conversion rate (X-CH4), the hydrogen production rate (Y-H2), and the CO selectivity (S-CO) are 92.28%, 3.34, and 0.99, respectively. The effects of the steam-to-carbon ratio (S/C), inlet velocity, and preheating temperature at different reaction temperatures are simulated using the FLUENT software package. As S/C increases, X-CH4 and Y-H2 increase, but S-CO decreases. The higher the reaction temperature, the less S/C promotes X-CH4 and Y-H2. When the reaction temperature is 700 degrees C and the inlet velocity is 0.2 m/s (residence time is 0.5 s), X-CH4 is above 95%, and changes in the inlet velocity strongly influence the formation of CO. With increasing preheating temperature, X-CH4, Y-H2, and S-CO all increase gradually. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.

Simulation of Methane Conversion to Syngas in a Membrane Reactor: Part I A Model Including Product Oxidation

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Partial oxidation of methane coupled with CRM and SRM in a tubular membrane reactor: a CFD simulation study

Simulation of A Multi-Stage Adiabatic Reactor with Inter-Stage Quenching for Dimethyl Ether Synthesis

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

Simulation and operation conditions optimization of reactor for syngas methanation

Simulation of Sorption-Enhanced Steam Methane Reforming over Ni-Based Catalyst in a Pressurized Dual Fluidized Bed Reactor

CFD simulation of methane steam reforming in a membrane reactor: Performance characteristics over range of operating window

Simulation and Experiment Study of Dimethyl Ether Synthesis from Syngas in A Fluidized-Bed Reactor

On the Modeling of Steam Methane Reforming

Numerical Simulation on Methane Steam Reforming in Grille-sphere Composite Packed Bed with Axial Variable Diameter Configuration Particle

The Simulation of an Industrial Fixed Bed Reactor for Methanol Dehydration to Dimethyl Ether

Modelling Of One-Step Methanation Process Combining Soecs And Fischer-Tropsch-Like Reactor

Computational Fluid Dynamic Simulation of a Sorption-Enhanced Palladium Membrane Reactor for Enhancing Hydrogen Production from Methane Steam Reforming

Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

CFD Simulation of Hydrogen Generation and Methane Combustion Inside a Water Splitting Membrane Reactor

Modeling of Non-Catalytic Partial Oxidation of Natural Gas under Conditions Found in Industrial Reformers

Numerical Simulation of CO Methanation for the Production of Synthetic Natural Gas in a Fluidized Bed Reactor

The Intrinsic Kinetics of Methane Steam Reforming over a Nickel-Based Catalyst in a Micro Fluidized Bed Reaction System

Modeling and Simulation of Water-Gas Shift Reactors with and without Membrane