Abstract:CFD simulation with detailed chemistry was conducted to understand the catalytic partial oxidation of methane (CPOM) on rhodium-coated foam monolith. For the underlying process occurred extremely fast with large gradients of temperature and species concentrations at the inlet, special attention must be paid to the appropriate treatment on computational geometry and corresponding boundary conditions for the simulation. Discussions were made carefully on this proposed issue in geometry modeling that the reliable predictions can be authentically obtained by adopting the same geometry as the experiments from the viewpoint of physics in order to fully consider the heat conduction/diffusion at the reactor inlet. The right model system was sufficiently validated by both the conceptual analysis and the experimental results. The reactor performance of CPOM process was thereafter studied by numerically revealing the effects of wall heat conduction, the channel diameter and the catalytic surface area on the profiles of temperature and species concentrations. The results showed that the maximum wall temperature, which was crucial for the catalyst stability, could be significantly reduced by increasing the thermal conductivity of the wall, and/or the channel diameter, and/or the catalytic surface area, but accompanied with a slight drop of the methane conversion. This deficiency can be retrieved by decreasing the atom feed ratio of C/O and/or elongating the catalytic bed. These results pointed out the necessity of facilitating the foam material, the channel diameter and the catalytic surface area with the operating conditions in order to achieve the best performance of the CPOM process in the millisecond reactor.

Simulation of Partial Oxidation of Methane on the Rhodium Coated Foam Monolith Based on the Elementary Kinetics

Analysis of catalytic partial oxidation of methane on rhodium-coated foam monolith using CFD with detailed chemistry

Catalytic partial oxidation of methane over rhodium coated foam monolith

Experimental Study and Modeling Analysis of Catalytic Partial Oxidation of Methane with Addition of Co2 and H2o Using A Rh-Coated Foam Monolith Reactor

Stability of Rh-coated Foam Monolith for Catalytic Partial Oxidation of Methane

Catalyst Deactivation of Rh-Coated Foam Monolith for Catalytic Partial Oxidation of Methane

Partial oxidation of methane on a nickel catalyst: Kinetic Monte-Carlo simulation study

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

Partial oxidation of methane coupled with CRM and SRM in a tubular membrane reactor: a CFD simulation study

Study on partial oxidation of methane at short contact time

Partial Oxidation of Methane to Syngas over Cr2o3 Catalysts

Detailed kinetic modeling of catalytic oxidative coupling of methane

Oxidative Coupling of Methane over Pt/Al2O3 at High Temperature: Multiscale Modeling of the Catalytic Monolith

Monte Carlo Simulation of Propylene Selective Oxidation and Ammoxidation Overβ-Bi2mo2o9 Catalyst under Anaerobic Condition

Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow

Simulations of Methane Partial Oxidation by CFD Coupled with Detailed Chemistry at Industrial Operating Conditions

Oxidative Coupling of Methane: A Microkinetic Model Accounting for Intraparticle Surface-Intermediates Concentration Profiles

Identification of Active Phase for Complete Oxidation of Methane on Palladium Surface

Computational Fluid Dynamics Simulation of a High-Throughput Catalytic Fixed-Bed Reactor for Total Oxidation of Methane

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor