Abstract:CFD simulation with detailed chemistry was conducted to understand the catalytic partial oxidation of methane (CPOM) on rhodium-coated foam monolith. For the underlying process occurred extremely fast with large gradients of temperature and species concentrations at the inlet, special attention must be paid to the appropriate treatment on computational geometry and corresponding boundary conditions for the simulation. Discussions were made carefully on this proposed issue in geometry modeling that the reliable predictions can be authentically obtained by adopting the same geometry as the experiments from the viewpoint of physics in order to fully consider the heat conduction/diffusion at the reactor inlet. The right model system was sufficiently validated by both the conceptual analysis and the experimental results. The reactor performance of CPOM process was thereafter studied by numerically revealing the effects of wall heat conduction, the channel diameter and the catalytic surface area on the profiles of temperature and species concentrations. The results showed that the maximum wall temperature, which was crucial for the catalyst stability, could be significantly reduced by increasing the thermal conductivity of the wall, and/or the channel diameter, and/or the catalytic surface area, but accompanied with a slight drop of the methane conversion. This deficiency can be retrieved by decreasing the atom feed ratio of C/O and/or elongating the catalytic bed. These results pointed out the necessity of facilitating the foam material, the channel diameter and the catalytic surface area with the operating conditions in order to achieve the best performance of the CPOM process in the millisecond reactor.

Simulations of Methane Partial Oxidation by CFD Coupled with Detailed Chemistry at Industrial Operating Conditions

Simulation of Partial Oxidation of Natural Gas with Detailed Chemistry: Influence of Addition of H2, C2H6 and C3H8

A Study of Acetylene Production by Methane Flaming in a Partial Oxidation Reactor

Experimental study and kinetics modeling of partial oxidation reactions in heavily sooting laminar premixed methane flames

Effect of Ethane and Propane Addition on Acetylene Production in the Partial Oxidation Process of Methane

Enhancing the Acetylene Yield from Methane by Decoupling Oxidation and Pyrolysis Reactions: A Comparison with the Partial Oxidation Process

Simulation of Partial Oxidation of Methane to Acetylene with Detailed Reaction Mechanism

CFD Simulations of Quenching Process for Partial Oxidation of Methane:Comparison of Jet-in-cross-flow and Impinging Flow Configurations

Detailed Chemistry Modeling of Partial Combustion of Natural Gas for Coproducing Acetylene and Syngas

Simulation of Industrial-Scale Gas Quenching Process for Partial Oxidation of Nature Gas to Acetylene

Experimental Study on Non-catalytic Partial Oxidation of Methane to Acetylene and Syngas

Modeling of Oxidative Coupling of Methane for Manufacture of Olefins—Part I: CFD Simulations

Enhancement of the Acetylene and Ethylene Yields from Ethane by Partially Decoupling the Oxidation and Pyrolysis Reactions

Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow

Simulation of Partial Oxidation of Methane on the Rhodium Coated Foam Monolith Based on the Elementary Kinetics

Numerical Simulation of Methane Combustion in Two-Layer Porous Media Under Oxy-Fuel Condition

Experimental Study of Partially Decoupled Oxidation of Ethane for Producing Ethylene and Acetylene

Detailed kinetic modeling of catalytic oxidative coupling of methane

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor

Analysis of catalytic partial oxidation of methane on rhodium-coated foam monolith using CFD with detailed chemistry

Numerical Simulation of CO Methanation for the Production of Synthetic Natural Gas in a Fluidized Bed Reactor