Abstract:Syngas production by the partial oxidation reforming of methane is a promising technology with a simple setup and quick dynamic response, which has great potential for application in small-scale fuel cells and portable power units. In this study, a catalytically enhanced porous media combustor for partial oxidation reforming is designed and tested. In the combustor, fuel-rich combustion in porous media and catalytic partial oxidation are integrated, benefitting from the merits of both technologies. Without external heat source, the combustor is directly ignited with a stoichiometric gas mixture during the cold startup process, and then adjusted to the partial oxidation conditions. Three zones, a preheating zone, an oxidation zone involving exothermic reactions, and a reforming zone involving endothermic reactions, are observed, which significantly affect the temperature profile in the axial direction. Considering both the methane conversion and reforming efficiency, the optimal equivalence ratio range for self-sustained operation is found to be 2.0-2.4. At an equivalence ratio of 2.0, the effect of the gas velocity on the temperature profile and gas composition of products are studied experimentally. At an equivalence ratio of 2.4 and a gas velocity of 0.13 m/s, the reforming efficiencies of the reactor reach 61.5% and 64.8% when 0.5 wt% Pd and 0.5 wt% Rh, respectively, are introduced to the second layer of the porous media. The carbon deposition at different axial positions of the reactor is analyzed, and the results indicate that carbon deposition by methane pyrolysis in the high-temperature oxidation zone is the dominating cause of carbon deposition. A re-ignition process at stoichiometric condition is helpful for the elimination of carbon.

Experimental Study on Non-catalytic Partial Oxidation of Methane to Acetylene and Syngas

A Study of Acetylene Production by Methane Flaming in a Partial Oxidation Reactor

Experimental study and kinetics modeling of partial oxidation reactions in heavily sooting laminar premixed methane flames

Effect of Ethane and Propane Addition on Acetylene Production in the Partial Oxidation Process of Methane

Simulations of Methane Partial Oxidation by CFD Coupled with Detailed Chemistry at Industrial Operating Conditions

Simulation of Partial Oxidation of Methane to Acetylene with Detailed Reaction Mechanism

Experimental Study of Partially Decoupled Oxidation of Ethane for Producing Ethylene and Acetylene

Enhancing the Acetylene Yield from Methane by Decoupling Oxidation and Pyrolysis Reactions: A Comparison with the Partial Oxidation Process

Elementary Reaction Modeling and Experimental Characterization on Methane Partial Oxidation within a Catalyst-Enhanced Porous Media Combustor

Partial Oxidation of Methane in Porous Reactor: Part I. Unidirectional Flow

Catalytically Enhanced Methane-Rich Combustion by Porous Media Reactor

Oxidative carbonylation of methane to acetic acid on an Fe-modified ZSM-5 zeolite

Simulation of Partial Oxidation of Natural Gas with Detailed Chemistry: Influence of Addition of H2, C2H6 and C3H8

Partial Oxidation of Methane into Formaldehyde on a Catalysis-Separation Reactor

Effect of Ni Loading and Reaction Conditions on Partial Oxidation of Methane to Syngas

Direct partial oxidation of methane to methanol in a specially designed reactor

Recent advances on methane partial oxidation toward oxygenates under mild conditions

Study on partial oxidation of methane at short contact time

Detailed kinetic modeling of catalytic oxidative coupling of methane

Experimental Study on the Ethane-Reburning Process at Several Air/Fuel Equivalence Ratios and High Temperatures

Ozone-assisted low-temperature oxidation of methane and ethane