Abstract:Molybdenum nanostructures are promising catalysts for a single-step methane conversion into aromatic hydrocarbons and for multiple other hydrocarbon reactions. Dynamic transformations of catalytic zeolite-supported Mo structures from an oxide to an oxycarbide and then to a carbide in methane dehydroaromatization were studied with in situ X-ray absorption spectroscopic measurements and density functional theory calculations. After a treatment in the presence of gas-phase oxygen, Mo is present in the form of isolated oxide structures. Under reaction conditions with methane, these initial oxide structures become carbided and catalyze methane conversion to aromatic hydrocarbons. As the reaction progresses, the Mo carbide structures agglomerate and accumulate excess carbon, leading to catalyst deactivation. Although the initial oxide structures and catalytic activity can be restored by reversing the agglomeration and coking with periodic oxygen regeneration treatments, it is desirable to continuously control the dynamic composition, size and catalytic activity of Mo structures under hydrocarbon reaction conditions. This objective can be accomplished by co-feeding an oxygen-containing molecule, such as CO2, that transforms Mo structures into an oxycarbide and slows the undesirable agglomeration and coking. It is, therefore, preferable for preserving catalytic activity to prevent full carburization of Mo and, instead, maintain the Mo structures in an oxycarbide form, an intermediate between an oxide and a carbide.

Investigation on the Performance of Supported Molybdenum Carbide for the Partial Oxidation of Methane

Investigation on the Mo_2C/Al_2O_3 Catalysts for the Partial Oxidation of Methane to the Synthesis Gas

Studies on the Performance and Structure of Supported Catalysts for the Partial Oxidation of Methane to Syngas

Study on direct aromatization reaction of methane: I. The reaction performance of supported Mo catalysts under oxygen-free conditions

Crucial Support Effect on the Durability of Pt/MgAl2O4 for Partial Oxidation of Methane to Syngas

Partial oxidation of methane over monolithic Ni/CeO2-ZrO2/γ - Al2O3 catalysts

Study on Methane Conversion over WOx/Co-Fe-Mo-O Catalysts

Partial oxidation of methane over monolithic Ni/CeO2-ZrO2/gamma-Al2O3 catalysts

Atomically dispersed MoNi alloy catalyst for partial oxidation of methane

Enhancing Methane Aromatization Performance by Reducing the Particle Size of Molybdenum Oxide

Oxidation of methane over Pd/mixed oxides for catalytic combustion

Molybdenum Oxide, Oxycarbide, and Carbide: Controlling the Dynamic Composition, Size, and Catalytic Activity of Zeolite-Supported Nanostructures

Preparation of Co/Ce0.5Zr0.5O2 Catalysts and Their Catalytic Performance in Methane Partial Oxidation to Produce Synthesis Gas

Partial Oxidation of Methane to Syngas over Cr2o3 Catalysts

Influence of Supports on Catalytic Performance and Carbon Deposition of Palladium Catalyst for Methane Partial Oxidation

Carbon-supported Molybdenum Carbide Catalysts for the Conversion of Vegetable Oils.

Promoted Ni Catalyst Over Titania-Zirconia Support for Partial Oxidation of Methane: Simple and Practical Catalysts

Ni–Mo2C Supported on Alumina As a Substitute for Ni–Mo Reduced Catalysts Supported on Alumina Material for Dry Reforming of Methane

Effect of a Mg Promoter on the Structure and Catalytic Performance of a Co/Mg/HZSM-5 Catalyst for the Partial Oxidation of Methane to Syngas

Oxidative Coupling of Methane: MOx-modified (M = Ti, Mg, Ga, Zr) Mn2O3-Na2WO4/SiO2 Catalysts and Effect of MOx Modification

Pd/SmMn2O5 catalyst for methane combustion: efficient lattice oxygen and strong metal-support interaction