Abstract:This work proposes a simulation-based multi objective optimization model for the operation of the product separation process in a methanol to propylene (MTP) plant, striving to enhance the system energy utilization efficiency. The formation of byproducts including an oxygenated hydrocarbon, dimethyl ether (DME), makes the product refining process highly energy-intensive, not only because that the various hydrocarbon byproducts require a long train of distillation columns but also owing to the fact that DME forms azeotrope with product propylene. Furthermore, the formation of oxygenated DME byproduct varies with the catalyst activity, which makes the system more complex. The contribution of this paper is 2-fold. First, it proposes a novel way of DME removal with responsive consumption of extractant methanol according to the DME concentration during one production period. In this way, the energy consumption of the condenser and reboiler of the methanol recovery unit can be expected to decrease by 61.5% and 37.6%, respectively. Second, a simulation-based multiobjective optimizaton framework is introduced to minimize the total heating and cooling costs and maximize the product purity, by integrating a rigorous process simulation model with an intelligent optimization algorithm. Given the characteristics of the MTP production process, three different operation scenarios, namely, the start of run, the designed operation condition, and the end of run, which correspond to different DME concentrations in the system, are covered. The approach is illustrated by its application to a real MTP plant, in which numerical results indicate that the proposed method is capable of identifying appealing operation options, and it can be utilized to support decision-making of the product separation of MTP plants.

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Study on Complex Reaction Network and Kinetic Model of a Methanol to Propene Process

Methanol to propylene process using moving bed technology and its engineering study

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

Kinetic and Regenerator Modeling of the Coke Combustion in the Moving Bed MTP Process

Kinetic Perspective on Methanol to Propylene Process Via HZSM-5 Catalyst: Balancing Between Reaction and Diffusion

Simulation of multi-fluidized-bed in series for methanol to olefins

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Multi-Scale Coupling Model Involving Bed and Catalyst Particle for MTP Reactor Simulation

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Methanol to Propylene over Foam SiC-Supported ZSM-5 Catalyst: Performance of Multiple Reaction–Regeneration Cycles

Techno-Economic Analysis of Methanol to Propylene Process

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Modeling and Simulation of Biodiesel Production Using a Membrane Reactor Integrated with a Prereactor

Multiphase catalytic reactors for methanol to olefins

Modeling and Design of a Multi-Tubular Packed-Bed Reactor for Methanol Steam Reforming over a Cu/ZnO/Al2O3 Catalyst

A design kinetic and hydrodynamic study of a coupled dual fluidized bed MTO reactor-regenerator system

Experimental and kinetic modelling studies for the design of fixed bed methanol reactor over CuZA catalyst

Methanol production by CO2 hydrogenation: Analysis and simulation of reactor performance

A Multi-Stage Fluidized Bed Strategy for the Enhanced Conversion of Methanol into Aromatics