Abstract:Light olefins is the incredibly important materials in chemical industry. Methanol to olefins (MTO), which provides a non-oil route for light olefins production, received considerable attention in the past decades. However, the catalyst deactivation is an inevitable feature in MTO processes, and regeneration, therefore, is one of the key steps in industrial MTO processes. Traditionally the MTO catalyst is regenerated by removing the deposited coke via air combustion, which unavoidably transforms coke into carbon dioxide and reduces the carbon utilization efficiency. Recent study shows that the coke species over MTO catalyst can be regenerated via steam, which can promote the light olefins yield as the deactivated coke species can be essentially transferred to industrially useful synthesis gas, is a promising pathway for further MTO processes development. In this work, we modelled and analyzed these two MTO regeneration methods in terms of carbon utilization efficiency and technology economics. As shown, the steam regeneration could achieve a carbon utilization efficiency of 84.31%, compared to 74.74% for air combustion regeneration. The MTO processes using steam regeneration can essentially achieve the near-zero carbon emission. In addition, light olefins production of the MTO processes using steam regeneration is 12.81% higher than that using air combustion regeneration. In this regard, steam regeneration could be considered as a potential yet promising regeneration method for further MTO processes, showing not only great environmental benefits but also competitive economic performance.

Kinetic and Regenerator Modeling of the Coke Combustion in the Moving Bed MTP Process

Methanol to Propylene Process in a Moving Bed Reactor with Byproducts Recycling: Kinetic Study and Reactor Simulation

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

A Seven Lumped Kinetic Model for Industrial Catalyst in DMTO Process

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Study on Complex Reaction Network and Kinetic Model of a Methanol to Propene Process

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Pore Plugging Effects on the Performance of ZSM-5 Catalyst in MTP Reaction Using a Discrete Model

Kinetic Perspective on Methanol to Propylene Process Via HZSM-5 Catalyst: Balancing Between Reaction and Diffusion

Catalytic Properties and Reaction Behaviors of ZSM-5 Catalysts in Different MTP Reaction-Regeneration Cycles

Methanol to Propylene over Foam SiC-Supported ZSM-5 Catalyst: Performance of Multiple Reaction–Regeneration Cycles

Modeling and Simulation of Coke Combustion Regeneration for Coked Cr2O3/Al2O3 Propane Dehydrogenation Catalyst

Solvents Molecular Mobility in Coked Catalyst ZSM-5 Studied by NMR Relaxation and Pulsed Field Gradient Techniques

Kinetic Study on Air Regeneration of Industrial Methanol-to-Olefin Catalyst

KINETIC MODEL FOR REGENERATION OF SPENT CRACKING CATALYST

Modeling and Analysis of Air Combustion and Steam Regeneration in Methanol to Olefins Processes

Kinetic Models for the Coke Combustion on Deactivated ZSM-5/MOR Derived from N-Heptane Cracking

Regeneration of catalysts deactivated by coke deposition: A review

Reactor Model of Counter-Current Continuous Catalyst-Regenerative Reforming Process toward Real Time Optimization

CFD-DEM simulation of chemical looping hydrogen generation in a moving bed reactor

Machine Learning‐assisted Multiscale Modeling of an Autothermal Fixed‐bed Reactor for Methanol to Propylene Process