Abstract:Moving towards a sustainable future requires modernized and economic energy production, especially in the context of current policy incentives. In the present paper, a new integrated process using flue gas leaving a power plant is projected and studied. The proposed process consists of a carbon dioxide (CO 2 ) capture unit (CCU), a water electrolyzer unit (WEU) for renewable hydrogen production, a power generation unit (PGU), a heat generation unit (HGU), and a methanol production unit (MPU). The designed structure has low CO 2 emission, low production cost, and high thermodynamic efficiency. This process is simulated using Aspen HYSYS. The simulation results show that the methanol production in this process is equal to 606,228 ton/year (methanol with a purity above 99% mole), and according to the environmental analysis, the intensity of CO 2 emission is 0.61 kgCO2kgMeOH , which is lower compared to that of bi- and tr-reforming processes. The results indicate that the overall exergy and energy efficiencies of the proposed process are 71.97% and 56.74%, respectively. Thermodynamic analysis determines that the exergy destruction intensity of this process is equal to 29.54 MJkgMeOH , and the highest destruction happens in the CCU (62.38%). It is also found that the exergy efficiency of the CCU, MPU, WEU, HGU, and PGU is 97%, 92%, 93%, 48%, and 53%, respectively. The exergy analysis exhibits that the coefficient of effectiveness ( ψi ) in the CCU is high (equals 85.89%), so it is the main factor in increasing the second law efficiency of the proposed process. Finally, according to the economic analysis, it is determined that the total annual cost and the total production cost of methanol in the presented structure respectively are 31,479,267 $ and 0.52 $kgMeOH , which compared to similar technologies based on renewable energy is lower by 64.86%. It is suggested to use this sustainable production mode to promote economic production in some pilot projects or high-tech parks.

Techno-Economic Analysis of Methanol to Propylene Process

Methanol to propylene process using moving bed technology and its engineering study

Study on Complex Reaction Network and Kinetic Model of a Methanol to Propene Process

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Kinetic Perspective on Methanol to Propylene Process Via HZSM-5 Catalyst: Balancing Between Reaction and Diffusion

Simulation and Analysis of the Regeneration Process of Methanol to Propylene

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Thermodynamic Study on Methanol Conversion to Propylene

Olefin Production Via Methanol Integrated with Light Hydrocarbon Conversion: Novel Process Designs, Techno-Economic Analysis, and Environmental Analysis

Techno-environmental-economic Assessment On, Municipal Solid Waste to Methanol Coupling With/without Solid Oxygen Electrolysis Cell Unit

Carbon negative methanol production for CO 2 utilization: Process design and 4E analysis

Multiphase catalytic reactors for methanol to olefins

Simulation and optimization of product separation process for a 520 kt/a methanol-to propylene (MTP) plant

Boosting carbon utilization efficiency for sustainable methanol production from biomass: Techno-economic and environmental analysis

Techno-Economic Analysis of Integrating a CO2 Hydrogenation-to-Methanol Unit with a Coal-to-Methanol Process for CO2 Reduction

Conceptual design and techno-economic analysis of a novel propane dehydrogenation process integrated with chemical looping combustion and CO 2 hydrogenation

Towards a sustainable, and economic production future: Proposing a new process for methanol production based on renewable hydrogen

Comparative investigation of CO2-to-methanol process using different CO2 capture technologies

Methanol production from natural gas reforming and CO2 capturing process, simulation, design, and technical-economic analysis

Aromatics Production from Methanol and Pentane: Conceptual Process Design, Comparative Energy and Techno-Economic Analysis