Abstract:Moving towards a sustainable future requires modernized and economic energy production, especially in the context of current policy incentives. In the present paper, a new integrated process using flue gas leaving a power plant is projected and studied. The proposed process consists of a carbon dioxide (CO 2 ) capture unit (CCU), a water electrolyzer unit (WEU) for renewable hydrogen production, a power generation unit (PGU), a heat generation unit (HGU), and a methanol production unit (MPU). The designed structure has low CO 2 emission, low production cost, and high thermodynamic efficiency. This process is simulated using Aspen HYSYS. The simulation results show that the methanol production in this process is equal to 606,228 ton/year (methanol with a purity above 99% mole), and according to the environmental analysis, the intensity of CO 2 emission is 0.61 kgCO2kgMeOH , which is lower compared to that of bi- and tr-reforming processes. The results indicate that the overall exergy and energy efficiencies of the proposed process are 71.97% and 56.74%, respectively. Thermodynamic analysis determines that the exergy destruction intensity of this process is equal to 29.54 MJkgMeOH , and the highest destruction happens in the CCU (62.38%). It is also found that the exergy efficiency of the CCU, MPU, WEU, HGU, and PGU is 97%, 92%, 93%, 48%, and 53%, respectively. The exergy analysis exhibits that the coefficient of effectiveness ( ψi ) in the CCU is high (equals 85.89%), so it is the main factor in increasing the second law efficiency of the proposed process. Finally, according to the economic analysis, it is determined that the total annual cost and the total production cost of methanol in the presented structure respectively are 31,479,267 $ and 0.52 $kgMeOH , which compared to similar technologies based on renewable energy is lower by 64.86%. It is suggested to use this sustainable production mode to promote economic production in some pilot projects or high-tech parks.

Conceptual design and techno-economic analysis of a novel propane dehydrogenation process integrated with chemical looping combustion and CO 2 hydrogenation

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

Techno-Economic Analysis of Methanol to Propylene Process

Process optimization, exergy efficiency, and life cycle energy consumption-GHG emissions of the propane-to-propylene with/without hydrogen production process

Concept design, technical performance, and GHG emissions analysis of petroleum coke direct chemical looping hydrogen highly integrated with gasification for methanol production process

System optimization and performance evaluation of shale gas chemical looping reforming process for efficient and clean production of methanol and hydrogen

Energy consumption and greenhouse gas emissions of shale gas chemical looping reforming process integrated with coal gasification for methanol production

New Process Combining Fe-Based Chemical Looping and Biomass Pyrolysis for Cogeneration of Hydrogen, Biochar, Bio-Oil and Electricity with In-Suit CO2 Separation

Towards a sustainable, and economic production future: Proposing a new process for methanol production based on renewable hydrogen

Conceptual Design and Techno-economic Analysis of a Coal to Methanol and Ethylene Glycol Cogeneration Process with Low Carbon Emission and High Efficiency

Liquid-phase CO 2 hydrogenation to methanol synthesis: Solvent screening, process design and techno-economic evaluation

Parameter optimization and exergy efficiency analysis of petroleum coke-to-hydrogen by chemical looping water splitting process with CO 2 capture and self-heating

Process modeling and analysis of a novel system achieving near-complete utilization of captured CO 2 from chemical looping hydrogen generation

Hydrogenation and TMP Coupling Process: Novel Process Design, Techno-Economic Analysis, Environmental Assessment and Thermo-Economic Optimization

Study of Propane Dehydrogenation to Propylene in an Integrated Fluidized Bed Reactor Using Pt-Sn/Al-SAPO-34 Novel Catalyst

A near-zero carbon emission methanol production through CO 2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Conceptual Design Development of Coal-to-Methanol Process with Carbon Capture and Utilization

Optimal design, thermodynamic, cost and CO2 emission analyses of coal-to-methanol process integrated with chemical looping air separation and hydrogen technology

An Integrated Methane Dehydroaromatization and Chemical Looping Process

Integrated CO 2 capture and conversion into methanol units: Assessing techno-economic and environmental aspects compared to CO 2 into SNG alternative